Windows 10: Aptio setup utility. SSD read only.

Laptop cannot exit aptus setup utility. And the ssd is on read only option. Resetting settings on aptus screen didn't help.Launch csm option unavailable.Please help.

:)

 

Stuck in the Aptio Setup Utility

I got the setup utility on startup and i tried following this instructions:

• Select the Boot menu in the Aptio setup utility, select 'Launch CSM' and change to enable.
• Select the Security menu n the Aptio setup utility, select 'secure Boot Control' and change to disable.
• Select Save & Exit and press 'yes'.
• Hold down the power button until the unit switches power off completely.
• Switch back on and continually press the F9 button for about ten seconds; this should now allow the unit to boot up into the Windows Recovery menu.
• Select 'Advanced Start Up' and wait until the recovery menu appears.
• Select ' Advanced Options'.
• Select 'System Restore' and select a date prior to when the problem occurred.

(but I wasn't able to do step #5-8)

 

Aptio setup utility menu

Hi Rupesh,

In order for us to assists you with Aptio setup utility menu, kindly follow the response of Stan Koper on this

link. This will provide you steps on how to change settings of BIOS and will help you resolve the issue with Aptio setup utility menu.

Let us know how it goes.

 

Aptio Setup Utility issue

The Aptio Setup Utility is often associated with the BIOS for ASUS computers. The first thing I'd check is the CMOS battery. However, there are other causes as well. Here is an article that may address your issue if it's not the battery:

https://rog.asus.com/forum/showthread.php?35315.... There is also this article, which may have some easier steps:
Aptio Setup Utility stuck on Asus laptops? Here's how to fix it.

Note these aren't Microsoft web sites but they appear to contain accurate information and no Potentially Unwanted Apps. They do use cookies, though, and may contain ads, so be aware.