Windows 10: Aptio Startup Issue

Hi! I need some help. I have an MSI gaming laptop. Got a 1Tb storage installed today. Previously, I’d been having issues with the Aptio Setup popping up. It was because the hard drive was loose, but now its popping up again..only this time it’s stuck on the “Checking Media Presence” thing. I tried restarting it and it got stuck again. What do I do??My mom is the one who replaced the storage and fixed my hard drive. I no squat about computers and everything…

:)

 

2020 Aptio Setup

Hi,H4ck3r_L0rD

My name is Erik. I'm an Independent Advisor and I'll be glad to help you today.

I just look for the details regards about your concern kindly follow these steps

Kindly do this basic steps just restart your computer and see if Aptio Setup Utility stuck is disappeared. If your PC still boots up to the setup utility instead of booting in the operating system, try other solutions to check.

Kindly follow these steps

1. Restart your PC.

2. The Aptio Setup Utility main menu should appear.

3. Enter Settings and look for the ”Reset Configuration Data” or ”Factory reset” options.

4. Reset BIOS to factory data and save changes.

5. Exit Aptio and reboot your PC.

Second Option:

Step 1: Boot your Asus computer and wait for it to the Aptio Setup Utility window.

Step 2: Go to Security, expand the Secure Boot Control menu and ensure the secure boot option is disabled.

Step 3: Save and exit the tab, then restart your PC and wait for it to load Aptio Utility settings once again.

Step 4: Navigate to the Boot tab, disable these two options – Secure Boot and Fast Boot.

Step 5: Besides, enable CSM (Compatible Support Module).

Step 6: Save the change and restart the Asus computer. It should boot to the Windows operating system instead of Aptio Setup Utility.

If this issue did not help you to solve the problem please let me know so we can able to look for another workaround solutions or we can ask another expert about their suggestion

Regards,

Erik

Independent Advisor

 

Stuck in the Aptio Setup Utility

I got the setup utility on startup and i tried following this instructions:

• Select the Boot menu in the Aptio setup utility, select 'Launch CSM' and change to enable.
• Select the Security menu n the Aptio setup utility, select 'secure Boot Control' and change to disable.
• Select Save & Exit and press 'yes'.
• Hold down the power button until the unit switches power off completely.
• Switch back on and continually press the F9 button for about ten seconds; this should now allow the unit to boot up into the Windows Recovery menu.
• Select 'Advanced Start Up' and wait until the recovery menu appears.
• Select ' Advanced Options'.
• Select 'System Restore' and select a date prior to when the problem occurred.

(but I wasn't able to do step #5-8)

 

Can't get GPU-Z to start with Windows 8.1 startup

I'm not sure how to do that. Could you list the steps for a noob?