Windows 10: ASmedia ASM1142 New install USB Ports not working

This is a new board/install. I first installed the driver that came with it dated 2014 then downloaded your driver, DRIVER VERSION: 1.16.56.1 and installed it. I have windows 10 Pro 19041.329. I plugged both a linksysAC1200 and my mouse in the usb port and I get no response. USB ports are not working. device manager does see the ASM1142. ASMedia USB Root Hub
and ASMedia USB3.1 eXtensible Host Controller. Please Help.

- - - Updated - - -

I noticed in device manager.

Device USB\ASMEDIAROOT_Hub\5&b746a&1&0 was not migrated due to partial or ambiguous match.

Last Device Instance Id: USB\VID_1908&PID_2311\5&34425563&0&2
Class Guid: {36fc9e60-c465-11cf-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

:)

 

ASmedia ASM1142 New install USB Ports not working

Just focus on the asm1142. Everything you ask has been posted.

- - - Updated - - -

I have a Rosewill RC-509 which uses the same ASMedia chip and it does the same thing. I wonder if this is a windows 10 issue?

I swapped out ASM1142 with the rosewill.

- - - Updated - - -

Interesting Development!!! I replace the ASM1142 board with the Rosewill RC-509. I used both the windows driver and your driver and I had the exact same problem. So I uninstalled and deleted the driver and loaded the Rosewill driver from CD and it works perfect. Once again they use the same Chip.

Also in device manager it ONLY lists the ASMedia USB 3.1 extensible host controler and not the USB Root Hub 3.0

I will post screen shots next.









I will try this driver for the ASM1142 tomorrow and post the results.

 

ASmedia ASM1142 New install USB Ports not working

The USB ports on the ASM1142 don't work. the USB Root Hub3.0 wont migrate.

Device USB\ROOT_HUB30\5&b746a&5&0 was not migrated due to partial or ambiguous match.

Last Device Instance Id: USB\VID_1908&PID_2311\5&34425563&0&2
Class Guid: {36fc9e60-c465-11cf-8056-444553540000}
Location Path:
Migration Rank: 0xF000FFFFFFFFF122
Present: false
Status: 0xC0000719

- - - Updated - - -

 

ASmedia ASM1142 New install USB Ports not working

OK, first off though I see the events listed, but I also see where Device Manager and the device itself is saying there's no issue, so I'm confused. Also what is "your driver"? Who's "your"?

Additionally, did you install the drivers for the Linksys device?

Lastly, and to be clear, are you plugging the Linksys device into the back of your PC or a separate USB Hub?

Help us help you by answering those questions please. And I say that because you did NOT answer my expand question in my last post.

Thanks.