Windows 10: Asus Laptop Stuck at Startup with Blue Screen Bugcheck 133 Error

Hello,I have an Asus laptop that is stuck at the Asus logo when I try to boot it up, and eventually, I get a blue screen error. I ran a Startup Repair, and the log indicates a "Bugcheck 133" error with the following parametersarameters = 0x1, 0x1e00, 0xfffff80148b1c340, 0x0.The suggested fix in the log was a "System Restore," but I canceled the repair action.I would appreciate any suggestions on how to resolve this issue and get my laptop back to working order. Has anyone encountered this issue before, and what steps can I take to fix it?Thank you!Startup Repair diagnosis and repair log ----

:)

 

Startup Blue Screen

Hi Jon,

Startup blue screen error(s) can occur if a problem causes your PC to shut down or restart unexpectedly. It could be due to the following:

• Outdated device software drivers
• Corrupted Windows update system files
• Software/Security conflicts

We would like to know some information:

• Did you get any blue screen stop error codes?
• Have you tried booting in Safe mode?

We suggest that you check this
article about troubleshooting blue screen errors and follow the troubleshooting steps provided there.

We will wait for your response

 

Asus laptop stuck on aptio setup screen

Asus laptop stuck on aptio setup utility screen. Ive done everything that’s been suggested with the Boot and Security but it still won’t work!!!

 

Stuck in startup screen with rotating blue circle

Hi,

As per the description, I understand that you are stuck on the blue screen with rotating circles upon startup.

If the above is true, I suggest that you perform Power Drain and check. To do so follow the steps below

• Unplug the charger and remove the battery of your laptop, if using a desktop remove the power cord.
• Press and hold the Power button for 30sec
• Plug the charger/power cord and restart system.

If the above did not help, I suggest that you perform Startup Repair using Windows Media Creation Tool and check.



Download the Windows 10 ISO and create a Media Creation tool and then perform Startup Repair.

Refer to the following link:

Download Windows 10

(Refer to the section "Installing Windows 10 using the media creation tool
" in the above article for creating the tool).

Once you have the installation media, follow the steps:

• Start your computer from the installation media. Insert the disk or USB stick and restart your computer. If you see a message asking you to “Press any key to boot from DVD,” do so. If you don’t see the message,
  you might need to change the boot order in your computer's BIOS settings so that it first starts from the disk or USB. When you see the 'Install Windows' page, tap or click 'Repair your computer' link to start the Windows Recovery Environment.
• In the Windows Recovery Environment, on the Choose an option screen, click
  'Troubleshoot'.
• Click, Advanced Options and then click on 'Startup Repair'.
• After this complete the repair and see if you are able to boot in to your computer.

Hope this helps