Windows 10: audio device is disabled

Blaupunkt bp32gm240 monitor.Headphone jack works but no sound from monitor speaker.Connected HDMI 1. When allow apps and windows to use this device for audio is set it shows no output devices found.When don't allow is set in control panel digital audio hdmi shows and the speaker symbol is not showing muted. I tried HDMI 2 connector as well.Now it is permantley set to allow and the speaker symbol is not showing mute. But no speaker sound

:)

 

Re-enable audio device

Hi,

I would be happy to assist you.

Before we proceed with troubleshooting, I would need little information on the issue.

• Are using speakers / head phones to listen to audio?

If you have disabled the audio device, then you might not see it under the list of playback devices. I would suggest you to follow these steps to make sure you see the disabled devices:

• • 
    Open
    Control panel.
    
  • 
    Click Hardware and Sound and then Click on
    Sounds.
    
  • 
    Under Playback tab, right click on the empty area and make sure
    “Show Disabled Devices” has a check mark on it. If headphones/Speakers are disabled, it will now show up in the list.
    
  • 
    Right click on the device and
    Enable it. Click OK.
    

If the issue still persists, try enabling speakers automatically using steps below.

• 
  Go to Settings> Click on themes> Advance sound settings> right click on the speakers or the audio device youo have connected > click on
  Configure device.
  
• 
  Test the sound level you want, click Next.
  
• 
  And configure the audio devices.
  

Hope this helps you. Do reply if you need further assistance on Windows 10.

Thank you.

 

Problem with audio devices

Hi Marcello,

I appreciate you for trying some steps in order to get the issue resolved.

If you're connecting to an audio device using USB or HDMI, you might need to set that device as the default.

Open Start, enter Sound, select it from the list of results, and then, on the
Playback tab, select a device, then Set Default.

I would also suggest you to turn off Audio enhancements.

• 
  Go to Start, enter Sound, and select Sound Control Panel
  from the list of results.
  
• 
  On the Playback tab, right-click (or tap and hold) the
  Default Device and select Properties.
  
• 
  On the Enhancements tab, select the Disable all enhancements
  check box and try to play your audio device.
  
• 
  If that doesn't work, select Cancel and, on the Playback
  tab, select another default device (if you have one), select the Disable all enhancements check box, and try to play audio again. Do this for each default device.
  

Please revert if you face any issues with Audio.

Thank you.

 

Audio stuttering after wake

Hi, ShimmyW

Welcome to the Microsoft Community.



Knowing that you have problems with your audio after waking up from sleep, you can try the following suggestions:



1. Check for Hardware Conflicts:

• Open Device Manager.
  
• Expand the “System devices” category.
  
• Look for any devices with yellow exclamation marks or error messages.
  
• If you find any conflicts, try disabling or uninstalling the conflicting devices.
  

2. Test with External Audio Device:

• Connect an external audio device, such as headphones or speakers, to the computer.
  
• If the audio stuttering persists, it suggests a problem with the Realtek audio device or its drivers.
  

3. Disable Audio Enhancements:

• Go to Control Panel > Sound.
  
• Select the Realtek audio device as the playback device.
  
• Click on the “Properties” button.
  
• Go to the “Enhancements” tab.
  
• Uncheck all the enhancement options.
  

If the above steps do not resolve the issue, contact Gigabyte support for further assistance. They may be able to provide additional troubleshooting steps or replace the audio device if necessary.

Best Regards

Martin | Microsoft Community Support Specialist