Windows 10: Audio issues

Okay, here we go, hear me out. About 8 hours ago i decided to Reinstall Windows 10, all went well, aside from one thing, aside from my USB headset i have absolutely no sound or no correctly working sound, mostly none at all.


But lets start small shall we, at this point, just one out of 3 options brought a Result which is my Terratec Aureon 5.1 PCI, the problem on it is, while it works relatively fine, Installing the driver works fine, it wont install a Device Manager to control any of the options, but the more deciding problem is that the Input is send throught the output so basically i talk and i can hear myself through every speaker, obviously stereo mix is disabled and all.

So that would be Problem Nr.1.


Problem Nr.2 is alot more Complicated, that includes the Second PCI Card, a Digitus DS 33700-1 with an envy24, which i used prior to reinstalling windows, so i am fairly certain that it does work, however, while it is shown in device Manager Windows can identifie it as an Audio Controller, but when i install the driver, the driver installs correctly, kind of, After it was sucesfully installed and the PC restarted the Device is still shown as an audio device a Device that is not working correctly and without drivers, obviously nothing else is working, not the Device manager not the output, nothing, i switched ports and all nothing had an effect on it.


Now we get to the Hardcore Problem, the Onboard sound, an Realtek ALC888B something, So, the Driver again installs like normal, even Microsoft updates it, too bad it updates it even after disabling and Uninstalling it. However, this one has weird problems, No device i plug in is recognized, unless i disable them Stereomix and Digital innternal input is constantly on and set as Primary, But now it get's more weird, while it wont recognize any Devices ever, when i disable the Front Audio Input/Output, suddenly the Device Manager for the Realtek soundcard shows both Front jacks have a Plugged in Device while not having a single Device plugged in ever.


I tried installing Drivers for Windows Vista, 7, 8 and 10 for all 3, tried the auto updates, nothing worked. I used the Digitus soundcard just moments beforereinstalling windows, so again, i am fairly certain that all 3 are working

:)

 

Audio 'dip' issue with Windows 10

Hi Elliot,



Thank you for posting your queries in Microsoft Community.



We are sorry to know that you have issues while listening to certain audios.

Please follow these steps and check if that helps.



Method1: I suggest you to run an audio troubleshooter.

Windows 10 has a built-in troubleshooter to check and fix issues with Sound. I would suggest you to run this troubleshooter to check if the issue is with your Audio

Refer these steps:

• Press Windows key +X, select Control panel

• Change the view by option on the top right to Large icons

• Click on troubleshooting and click on the view all option on the left panel

• Run the playing Audio troubleshooter.



Method2: Uncheck the enhancement feature in sound options.

• Press X from the key board and select control panel.
• Select sounds under control panel.
• Go to advance setting and uncheck the enhancement feature and check if that helps.

Hope this helps in resolving the issue. If the issue persists, do get back to us. We will be

 

Can not record audio.

Hi,

We suggest that you run troubleshooting for Audio Recording by following these steps:

• Type troubleshooting on the search box.
• Click View all.
• Select Recording Audio.
• Follow the steps to troubleshoot Recording Audio.

Let us know if you need further help.

 

Windows 10 audio issue

Hi,

Audio issues might have caused by an outdated audio driver. For us to troubleshoot this issue, we suggest that you follow the steps on this article:

Fix sound problems. You can try different troubleshooting methods by clicking the drop down box, below the title, and choose one from the list.

Let us know how it goes.