Windows 10: Auto-Execute EXE in Window When USB Plugged In

Hi,Is there c# code snippet or any way to execute exe program in window when USB is plugged in?Thanks,

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

explorer.exe executable check-ups

O should of dig some other entries then Internet Explorer or Windows Explorer in the Group Policies It seems one way to just bypass it:

User Configuration > Administrative Templates > Windows Components > Attachment Manager > Add .EXE (and all the executables in general) to "Inclusion list for moderate risk file types"

does the trick pretty nicely..