Windows 10: Auto repair can’t activate as laptop keeps shutting down

Auto repair has been on a loop for days and the laptop just shuts down reboots repeats the cycle auto repair launches immediately shuts down again over & over

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Laptop loads to Windows 10 logo then blue screen and shuts off


shadowthefire,

What brand/model laptop is this?

Try the following:

Step 1: Make sure the computer is shut down, and press the Power Button to turn the computer on.

Step 2: As soon as you see the rotating loading circle, press and hold the Power Button until the computer shuts off again.

Step 3: Repeat this process 2 or 3 times until you see the following on the screen: Preparing Automatic Repair
Let the computer boot to the Automatic Repair screen.

Step 4: The next screen (blue) goes to: Choose Account to continue
Select your account, enter your Password, and press: Continue

Step 5: A Diagnosing your PC screen appears, and it takes you to the screen for: Automatic Repair

Step 6: Here you can click Restart, or, Advanced Options
Step 6.1: Select: Restart

Allow the computer to go through the routine, and see if it solves the issue.

If the problem still exists, go back to Step 1 through Step 6.

Step 6.2: This time, click: Advanced Options

Step 7: In the Choose an Option screen, select: Troubleshoot

Step 8: At the next screen, select: Advanced Options

Step 9: Last, select: Startup Repair (Used for problems that keep Windows 10 from loading)

Please provide an update.

 

Stuck in auto repair loop

Hi Alex,

Thank you for posting your query on Microsoft Community.

If the screen is stuck for a long time on auto repair, I suggest you to restart the computer using power button and check. If the issue still persist, I suggest you to check if you are able to boot the computer into Safe Mode environment and check.

To use a Safe Boot option, follow these steps:

• 
  Restart your computer and start pressing the F8 key on your keyboard. On a computer that is configured for booting to multiple operating systems, you can press the F8 key when the Boot Menu appears.
  
• 
  Select an option to “Safe mode with networking” using the arrow keys on the keyboard when the Windows Advanced Options menu
  appears, and then press ENTER.
  

Hope this information is helpful. Do let us know if your issue is resolved. For any further query, feel free to contact us.

Thank you.