Windows 10: Automatic Repair : Help

Hello Microsoft Community:I have a Dell LATITUDE E6510 Laptop running Windows 10 Pro. The laptop failed to Start up 1 day the Automatic Repair is telling me, "Your PC did not start correctly - press Restart to restart your PC, which can sometimes fix the problem. You can also press "Advanced options" to try other options to repair your PC. Restart button goes nowhere and Advanced options is not helping either. Can anybody give some insight here? Please help! Thanks!

:)

 

HELP! Windows 10 automatic repair couldn't repair PC. Details below

Hi Matthew,

As you are facing issue withAutomatic Repair, we would assist you for sure.

In order to understand the issue in a better manner, please share the following details

• 
  I tried system restore” What is the error exact error message you received?
  

If automatic repair fails, you may try to repair them using these commands through Command Prompt under Advanced Options. Follow the steps:

Since you have done most of the troubleshooting steps, I would suggest you to try repairing the Boot Configuration Data through the command prompt by following the steps below and check if it helps.

I suggest you re-built the boot record by following the below commands and check if it helps.

You will have to use Windows 10 installation media to follow the steps to boot into Recovery Environment and try to rebuild BCD.

Step 1: I suggest you to create an installation media for
Windows 10 using the media creation tool:

Installing Windows 10 using the media creation tool

Step 2: After preparing the installation media, insert it hard reboot the device and follow the below:

• Boot into Windows Recovery Environment using the Windows 10 installation media.
• Click on Repair your computer.
  
• Click on Troubleshoot and in the advanced options.
• Select Command Prompt. Type the following commands into the prompt and press Enter key after each command.

• 
  bootrec /fixmbr
  
• 
  bootrec /fixboot
  
• 
  bootrec /scanos
  
• 
  bootrec /rebuildbcd
  

5. Restart the computer.

NOTE: Modifying BIOS/ complementary metal oxide semiconductor (CMOS) settings incorrectly can cause serious problems that may prevent your computer from booting properly. Microsoft cannot guarantee that any problems resulting
from the configuring of BIOS/CMOS settings can be solved. Modifications of the settings are at your own risk.

Hope it helps. Reply to the post with an updated status of this issue for further assistance.

Thank you.

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.

 

Surface Book Automatic Repair Issue

Hi Andrew,

Thank you for posting your query on Microsoft Community.

We sincerely regret for the inconvenience caused.

Provide us the following details in order to assist you better.

• How did you perform the Automatic repair? Did you use a DVD to perform it or via desktop?

If you perform via desktop then I suggest you to boot your device using installation media.

I suggest you to perform the startup repair using the Windows 10 installation media from the below link and check if it helps.

http://windows.microsoft.com/en-us/windows-10/media-creation-tool-install

Boot from the Windows 10 installation media and then perform automatic repair and check if it helps.

Follow the steps to perform Automatic repair:

• Insert installation media and restart the computer.
• Select language and click on Next.
• Select Repair your Computer and click on Skip this drive.
• Select Troubleshoot and click on Advanced Options.

Here choose the option Automatic Repair and follow the prompted instructions.

Please let us know if you need further assistance.

Thank you