Windows 10: Automatic repair while booting from hdd and installing windows on ssd.

Migrated windows from hdd to ssdFormatted hddPrioritised boot from ssd in biosTurned on the pcAutomatic repairTo deal with this I select boot from a device > then EFI USB device > it says no bootable USB detected, select from these drives > there are few options including the newly installed ssd > I select ssd > then it shows disk checking, press any key to stop > I stop it > windows then boots from ssd.It very difficult to repeat all this everytime I turn on my pc. Please suggest a fix.

:)

 

Windows 10 random automatic repair after changing boot priority.

Hello. So i have an Windows 10 Pro. Sometimes when i am changing in bios boot order from USB to HDD ( SDD ) windows starts booting with AUTOMATIC REPAIR and then restarting. Is this something with BIOS \ Windows 10 bug related? Tested on pc and on laptop , and sometimes it doing the same.


Situation on PC first,listen:

Few days ago after i change boot in UEFI BIOS from USB to SSD.
Then Windows 10 showed at 1 boot Automatic Repair.
When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc.
Interesting is that if I restart Windows (after procedure mentioned earlier) it will boot normally. This startup problem was occured only when starting system again after shutdown or restarted pc from windows.So i was needed 2 boots to boot properly to windows.
But on pc, format was needed to remove completely issue and after format is fine.

Pc :
2x8gb Kingston Hyperx 1600mhz DDR3
SSD samsung Evo 250 gb
4790k stock
Asus Sabertooth Z97 Mark 2 with UEFI BIOS


Now laptop with old standard bios:
On laptop i made the same operation, change boot from USB to HDD and on first boot Windows 10 shows Automatic Repair. But it happened once and i cant reproduce. No format was needed.

laptop is very old with 2gb ram

Why on pc format was needed when on laptop not?



Thanks for suggestions.

 

Switching Windows Boot Manager from HDD to SSD

(1) It is the EFI partition that holds the boot files including the BCD (Boot Configuration Data). The BCD tells the boot process which Windows partition to boot to. It looks like you set the BIOS correctly to boot using EFI (& its BCD) that is on the SSD. However, that is a clone of EFI on the HDD -- which loads the Windows partition that is on the HDD. You need to alter the SSD's BCD to boot to the Windows partition that is on the SSD. Let's see your BCD...

(a) Type CMD into Search, & click Run as Administrator.

(b) Enter the following commands...

BCDEdit /Enum All <<<Show the BCD

DiskPart <<<Enter DiskPart

List Vol <<<List the Volumes

Select Disk 0 <<<Focus on the HDD

List Part <<<List its partitions

Select Disk 1 <<<Focus on the SSD

List Part <<<List its partitions

Exit <<<Exit DiskPart

Use Ctrl-A & Ctrl-C to copy, then post it to us. We can adjust it manually.

(2) It might be as Paloma suggests, that disconnecting the HDD will cause the BCD (on the SSD) to self-adjust. Windows might do an automatic Startup Repair. But I hope it also gets the Recovery partition right.

(3) I guess you want that D: partition. So, after all is well with the SSD, you may plug the HDD back in. But it will be best to delete its EFI, Windows & Recovery partitions. Just keep D:.

 

Windows 10 - Automatic Repair - boots in 2nd cycle

Hello. This is similiar topic on our forum but now i will explain more brighter.
So last time after i change in my UEFI boot priority from :"UEFI USB KINGSTON" to "P1 SSD SAMSUNG EVO 250 GB" i am getting weird booting problem with Windows 10.







When starting Windows 10 boot loader starts by "preparing automatic repair" and diagnosing pc. Then after this i get screen with Your pc did not start correctly or Automatic Repair couldnt repair your pc . And when i click restart then Windows 10 boot fine. So i am needing 2 boots to boot properly to windows.

My disk is on MBR partirion. Is this related to my UEFI/Partitions?



Somebody said to me this:"UEFI booting requires a GPT disk. This is why Windows has to fix itself and only boots in 2nd cycle - as you keep trying to boot UEFI to an MBR disk."



Also i know that UEFI firmware can emulate BIOS functionality (CSM/Legacy) and work with MBR disks just fine. Or i am wrong? And cause is elsewhere?



I am a little confused. Thx for reply. My ssd Samsung Evo 250 GB , rams 2x8gb DDR3 Kingston Hyperx 1600mhz.