Windows 10: Automatic repair while turning on the pc

My pc is continuously showing automatic repair on restarting the pc and then shows "your pc did not start correctly. This is happening first time in my pc, please help.

:)

 

Preparing Automatic Repair/Diagnosing Your PC Loop

Hi,

To resolve your concern with continuously looping your system, we suggest that you follow the Startup Repair steps below:

• Turn off your computer.
• Turn on your computer. As soon as you see the Windows logo with the spinning dots, press and hold down the power button until your computer turns off. Do this process
  twice.
• Turn on your computer for the third time, and let it load.
• It should give you the message: Preparing Automatic Repair.
• On the next screen that would appear, click on Advanced Options.
• Select Troubleshoot.
• Go to Advanced Options.
• Click on Startup Repair.
• Wait for the repair to finish.

We would appreciate it if you could get back to us and provide us your feedback.

 

Windows10 Automatic Repair

Hi,

This issue might have occurred due to corrupted system files that are not letting the operating system to perform repair and boot to the desktop.

We would like to know some information:

• Have you tried booting in
  Safe Mode? If not, we suggest that you try it. Check this article for information.
• What troubleshooting steps have you done so far? We need to know it for us to know what other troubleshooting steps to give.

You can check the troubleshooting steps provided by Deepika Gowda on this

link.

We will wait for your response.

 

Automatic repair in pc

Hi,Sanjana

My name is Erik. I'm an Independent Advisor and I'll be glad to help you today.

Boot in Safe Mode and Troubleshoot

Step 1. Go to the Windows Recovery Environment (winRE)by doing the following steps:

Press on the power button to turn off your device.

Press on the button again to turn on.

Once Windows starts, press on the power button again for 10 seconds to turn it off. Then press it on again.

Upon the reboot, hold on to the power button for 10 seconds to turn if off, then turn it on again.

Because you’ve repeatedly turned on and off your PC, you will be redirected to winXXXXXXXXXXXXXXXXXXXX.

Step 2. Once you get the Advanced Startup screen on your Windows 10 computer, go to its Troubleshoot > Advanced Options.

Step 3. From all the provided options here, click on the “Startup Settings” feature.

Step 4. This will list different tasks that you can perform in the startup settings. Just click on the “Restart” button to continue.

Step 5. The screen will list various operations that you can perform now, including restarting your system in the safe mode. Just press the key that denotes the Safe Mode (like “4” in this case).

Step 6. That’s it! This will make your system restart in the safe mode. Once you get the following screen, you can select the option of your choice and boot your Windows in the Safe Mode with Command prompt

Step 5. Once the Command Prompt is launched, we will take the assistance of the Bootrec.exe tool to fix Windows 10 automatic repair black screen. I would recommend running the following commands:

Bootrec /fixMbr

Bootrec /fixBoot

Bootrec /ScanOS

Bootrec /RebuildBcd

After running these commands, you can close the Command Prompt and restart Windows in the normal mode.

I hope this helps! Please let me know if you have any further concerns.

Regards,

Erik

Independent Advisor