Windows 10: Backing up windows 11 on USB not working?

I'm trying to save a copy of windows 11 on my flash drive incase my bios were to crash again, so I bought a 128 gb flash drive and it said it needed to be formatted to NTFS and so I did and when I went back to "Backup and Restore windows7" and hit create system image it said "the drive is not valid backup location" and so I clicked "set backup" and it said "a system image cannot be saved on this location" so I hit more information and it said "backup not allowed on removable devices, you can try to save a single system image on this device ect" but I tried that before and it didn't work so h

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

IE 11 not working

Hi,

Thank you for posting your query in Microsoft Community.

I understand your concern and will assist you to resolve this issue.



I suggest you to follow the steps below and check if it helps.

Windows 10 has a built-in troubleshooter to check and fix issues with Internet Explorer. I would suggest you to run this troubleshooter to check if the issue is with your Explorer.

Refer these steps:

• Press Windows key +X, select Control panel

• Change the view by option on the top right to Large icons
• Click on troubleshooting and click on the view all option on the left panel
• Run the Internet Explorer performance troubleshooter

And also refer the link below and check if it helps.

http://windows.microsoft.com/en-in/internet-explorer/ie-crashes-stops-working#ie=ie-11

Hope this helps. If the issue remains unresolved, please get back to us and we would be happy to help.

 

USB 3.0 is not working

I have tried below all the steps bu my both USB 3.0 are not working.

Please suggest more to add on.

I understand that the USB port is not working. The issue may arise if the currently loaded USB driver has become unstable or corrupt or if your PC requires an update for issues that may conflict with a USB device and Windows. This may also occur if your
USB controllers may have become unstable or corrupt. So, I suggest you to try the following steps and check if the issue persists.

Method 1:

Remove and reinstall all USB controllers.

Open Device Manager by pressing Windows key + X and select device manager from the list. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
In the list of hardware categories, find and expand Universal Serial Bus controllers.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and let the USB controllers get reinstalled.
Plug in the removable USB device, and then test to make sure that the issue is resolved.
Method 2

The issue could be if the drivers are not updated or get corrupted. So, try to install all of the Windows updates available and if issue persists, try to update the drivers by following the steps provided in the article mentioned below.

Update drivers in Windows 10

https://support.microsoft.com/en-in...566-b983195752c1/update-drivers-in-windows-10

Method 3

If issue persists try the steps provided to uninstall the USB device from Device Manager, uninstall the device drivers from program list and then download the latest drivers from the manufacturer's website.

Step 1:

Uninstall the Device from Device Manager

Open Device Manger by clicking on Windows key + X and selecting Device manager from the list.
Expand the USB section.
Find the USB device.
Right click USB and select Uninstall.
Select the check box delete the driver software for this device.
Reboot the computer after uninstall process has finished.
Step 2:

Uninstall the Device Drivers from Program List in Control Panel

Click on start, select Control Panel
Now click on Programs and select Programs and Features.
Find the USB.
Right click USB driver and select Uninstall.
Reboot the computer after the uninstall process has finished.
Step 3:

Download and install the latest drivers for the USB from the manufacturer website

Hope this would help. If issue still persists post back with current status of your computer and result of proposed suggestion, we will be happy to assist you.

---------
Hello Roger,

I understand that the USB port is not working. The issue may arise if the currently loaded USB driver has become unstable or corrupt or if your PC requires an update for issues that may conflict with a USB device and Windows. This may also occur if your
USB controllers may have become unstable or corrupt. So, I suggest you to try the following steps and check if the issue persists.

Method 1:

Remove and reinstall all USB controllers.

Open Device Manager by pressing Windows key + X and select device manager from the list. If you're prompted for an administrator password or confirmation, type the password or provide confirmation.
In the list of hardware categories, find and expand Universal Serial Bus controllers.
Right-click every device under the Universal Serial Bus controllers node, and then click Uninstall to remove them one at a time.
Restart the computer, and let the USB controllers get reinstalled.
Plug in the removable USB device, and then test to make sure that the issue is resolved.
Method 2

The issue could be if the drivers are not updated or get corrupted. So, try to install all of the Windows updates available and if issue persists, try to update the drivers by following the steps provided in the article mentioned below.

Update drivers in Windows 10

https://support.microsoft.com/en-in...566-b983195752c1/update-drivers-in-windows-10

Method 3

If issue persists try the steps provided to uninstall the USB device from Device Manager, uninstall the device drivers from program list and then download the latest drivers from the manufacturer's website.

Step 1:

Uninstall the Device from Device Manager

Open Device Manger by clicking on Windows key + X and selecting Device manager from the list.
Expand the USB section.
Find the USB device.
Right click USB and select Uninstall.
Select the check box delete the driver software for this device.
Reboot the computer after uninstall process has finished.
Step 2:

Uninstall the Device Drivers from Program List in Control Panel

Click on start, select Control Panel
Now click on Programs and select Programs and Features.
Find the USB.
Right click USB driver and select Uninstall.
Reboot the computer after the uninstall process has finished.
Step 3:

Download and install the latest drivers for the USB from the manufacturer website

Hope this would help. If issue still persists post back with current status of your computer and result of proposed suggestion, we will be happy to assist you.