Windows 10: Bad sectors on Seagate ST2000DM001 HDD. The end?

hello.i am using a Seagate st2000dm001 hard drive which apparently has "bad sectors" on it. i am running HD Tune 2.55 right now and i have already found 4 bad sectors. The hard drive is somewhere around 8-9 years old now. i've been getting a lot disk read errors while gaming recently. is it possible to fix the hard drive? or is it finally after all those years time to say goodbye to it, throw it in the dumpster and buy a new HDD?

:)

 

HDD Bad Sector

Hi Nataniel!

I am not sure what your question is exactly, but one thing I'd recommend for sure will be to look for a replacement drive since there is already a bad sector on your current one.

Basically there are two kinds of bad sectors - hardware and software:

• Hardware ones are caused by physical damage or becoming magnetically fixed, and they are unrepairable. In short, once they appear it's only a matter of time (no way to say how long) until the HDD fails.
• Software bad sectors on the other hand occur when something called an Error Correction Code (ECC) doesn't match the contents of the hard drive. These can be repaired by overwriting the data on the drive with zeroes (a.k.a. low level formatting) and sometimes
  by running a **chkdsk [write the letter of the drive:] /r** in the CMD.

As for getting the information from the drive if one of the partitions fail, most likely you won't be able to, which is why I'd suggest to make a regular backup of your most important data.

Hope this helps and feel free to ask any questions you may have.

 

HDD is about to fail, bad sectors...

My Seagate HDD had been working fine for almost ten years before I replaced it, and I lost no personal files and found no bad sectors on it.

 

BAD SECTORS ON HDD, REFORMAT AND REINSTALL W10 FREE UPGRADE

Hi,

Thank you for providing us with the response to our questions.

I suggest you to run Check disk and check if it helps. Remove your external Hard drive and perform the steps on your system:

Check disk is a utility that can check your hard drive for corrupted segments and fix them. You can refer to these steps to run the Check disk utility:

• 
  Press Windows key + X, select “Command promt (Admin)”.
  
• 
  In the command prompt window, type
  “chkdsk/r” and press Enter.
  
• 
  Press “Y” when it asks if you want to check disk to run when the computer boots the next time.
  
• 
  Restart the computer for Check disk to detect and repair any corrupted sectors in your hard drive.
  

Important: While performing Error-checking or ChkDsk on the hard drive, if any bad sectors are found and when attempting to repair that sector, the
data available on that sector might be lost.

Please let us know if you face any issues with Windows.

Thank you.