Windows 10: Batch Program that Sends Hex String to Serial Port

Hello, I am trying to create a simple batch program that will send a hex code (0xF5 0x00 0x01 0x02 0x02 0x01 0x06) out of COM1 at 9600 baud 8 bits No Parity 1 stop. I have tried to search up some methods already with no success. I have been able to send this code successfully using a terminal program I downloaded, however I need my computer to be able to automatically send it (by running the batch file). Does anybody have an idea of how I can get this to work? Here is one of the methods I have tried:

mode com1:9600,N,8,1

echo 0xF5 0x00 0x01 0x02 0x02 0x01 0x06 >com1

I have also tried putting quotes around the hex string with no luck, as well as a method using Powershell with many errors. Any help would be appreciated, thanks!



:)

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

Yellow ! next to Prolific USB-to-Serial Com Port (COM3)

Hi John,



Welcome to Microsoft Community and thank you for posting your query.



Based on your description, the issue seems like HooToo USB port driver is outdated. Let’s try simple steps and check if this help.



I recommend you to update the HooToo USB port driver and check if this helps. Follow the below steps.

• 
  Press Windows key + X and click on
  Device manager.
  
• 
  Click on Universal Serial Bus to expand and right click on the port device and click on
  Update.
  

If the issue still persist, I suggest you to go to the USB manufacturer website and install the driver for Windows 10. If the available USB driver is not for Windows 10, try installing the driver in compatibly mode and check.

HooToo Support Downloads

• 
  Right-click on the setup file of the driver and select Properties.
  
• 
  Select Compatibility tab.
  
• 
  Check Run this program in Compatibility mode.
  
• 
  Let the driver install and then check the functionality.
  

Hope this helps. If you need further assistance with Windows, let us know and will be glad to help.

 

E60 Bluetooth Serial port profile not detected

Hi,

The Nokia site lists that E60 supports Serial port profile, but when I try to browse the phone services on my pc (with bluetooth adapter), it does not list Serial port profile! I would not blame the bluetooth adapter, because it finds serial port profile (SPP)
on my wife's phone and all other services on my E60! Do I need to do something special to enable SPP on the E60?

Anand