Windows 10: battery optimally

I want to charge the battery optimally. Stop charging the battery when it reaches 80% charge. Acer Travelmate P-658-mg. Windows 11.How can I solve this? Thank you for your help.

:)

 

Disk optimization scheduling in Windows 10

Hi,

Welcome to Microsoft Community.

I suggest you to follow the below steps and check if it helps.

• 
  In search select Defragment and optimize drives
  
• 
  Click on change settings
  
• 
  In optimization schedule
  
• 
  In frequency select the options accordingly.
  

Please let us know if you need further assistance.

Thank you.

`

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.

 

Running Optimize literally does nothing; in PS it yields an error

After doing a clean install of Windows 10 20H2 (OS Build 19042.906) and fully updating it, and updating all of the Dell drivers from Dell.com, I tried the following Optimize and Defrag options from How to Optimize and Defragment Drives in Windows 10 (tenforums.com/tutorials/8933-optimize-defrag-drives-windows-10-a.html):

• OPTION ONE: To Optimize Drives in Optimize Drives Tool: Steps 2, 3, and 4,
• OPTION TWO: To Optimize Drives in Command Prompt: Step 2, and
• OPTION THREE: To Optimize Drives in PowerShell: Step 3

The four steps attempted from Options 1 and 2 resulted in no notice action; i.e., it appeared as though nothing happened after executing the commands.

When I ran Step 3 of Option 3, I received the following error message.

What does this mean and now what do I do?

Thanks!