Windows 10: Battery problem. Thinkpad X280. Productnumber: 20KES0Y727, BIOS-version: N20ET66W 1.51

HiI have replaced the original battery 3 months ago, and it has worked well until recently.Now the battery indicator says 100% but as soon as I disconnect the powercord, the system locks down.I have used Lenovo vantage to check the battery, and everything seems to be fine.I have updated everything, drivers etcI have had the battery out and performed a "60 sec press on powerbutton" to reset "internal static current".I hope someone has an idea what to do next!I do not think it is related to HW. I have boot'et in Linux, and the PC continued working after disconnecting the power cord.I have tried

:)

 

Lenovo Recalls 208,000 ThinkPad Batteries

On March 1, 2007, Lenovo voluntarily recalled certain 208,000 9-cell lithium-ion batteries. These batteries were manufactured for use with ThinkPad notebook computers that shipped worldwide between November 2005 and February 2007. All ThinkPad R60, R60e Series, ThinkPad T60, T60p Series and ThinkPad Z60m, Z61e, Z61m, and Z61p Series with 9-cell 10.8V, 5.2 Ah batteries with part number FRU P/N 92P1131 are being recalled. All affected batteries will be replaced free of charge. Lenovo suggests those computers with defective units remove the battery and use the AC adaptor until a replacement has arrived.

Source: Lenovo

 

Alienware Area 51 m15x BIOS Update Released

If you were among the group of people experiencing overheating issues with your Alienware Area 51 m15x laptop, then there are some good news for you. A new BIOS update, version X29b P3A30 is now available. The update allegedly allows VGA fans to increase up to 5400 rpm and thus better cool the GPU. To obtain the new BIOS, you'll need to email the m15x support line (L: Area51_m15x@alienware.com). In reply you should receive a link to the BIOS .zip archive. Once you download the small file, Alienware recommends to follow the steps described in the Read full story marker.



Open Nero Ultra Edition, click Backup, and then click “Burn Image to Disc.” Next, select the file “m15x_x29b.iso from the unzipped folder.

• Plug your AC adapter in
• Disconnect all third-party peripherals
• Don’t turn off the computer or restart it during the update
• Don’t eject your DVD/Blu-ray drive during the update.

Steps:

• Open BIOS by tapping F12 during boot
• Set BIOS to boot from your CD-ROM drive first
• Save and exit
• Upon reboot, the BIOS flash update will proceed
• Click “Yes” through the prompts
• Restart

Source: LAPTOP Magazine

 

Battery Won't Charge Fully

Make sure to install all Windows important updates.

Install latest versions of your laptop device drivers you can download the latest device drivers from the device manufacturer or from your laptop manufacturer website.


Step 1

1. Shutdown your laptop.

2. Remove the battery.

3. Connect the AC power adapter to your laptop.

4. Power on the laptop

5. Open the Device Manager by typing Devmgmt.msc into Start Menu or from Control Panel.

6. Under the Batteries category, right-click all of the Microsoft ACPI Compliant Control Method Battery listings, and select Uninstall (it’s ok if you only have 1).





7. Shutdown the laptop.

8. Insert the battery.

9. Power on the laptop.

If above suggestions wont resolve the battery charge issue then follow below steps.




Step 2

1. Shutdown the laptop.

2. Remove the battery.

3. Start the laptop with only AC adapter connected to laptop.

4. When you login to Windows OS connect the battery while Windows OS working.





Step 3

Reset the System Management Controller. Use one of these methods to reset the SMC, which controls battery management, battery status light.

1. Shut down the computer and disconnect the power cord.

2. Remove the battery.

3. Press and hold the power button for ten seconds.

4. Reattach the battery and AC power adapter, then start up the laptop.


Hopefully one of the above suggestions will help you resolve the battery not charging problem. If battery still doesn't charge, you may need to replace your battery.