Windows 10: Been having multiple BSOD with memory problems

6: kd> !analyze -v******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************MEMORY_MANAGEMENT 1a # Any other values for parameter 1 must be individually examined.Arguments:Arg1: 0000000000000403, The subtype of the BugCheck.Arg2: fff

:)

 

Multiple different types of BSOD - Windows 10 - Memory issues

Hi,

Thank you for contacting Microsoft Community. I will surely help you.

A blue screen error (also called a stop error) can occur if a problem causes your PC to shut down or restart unexpectedly.

Method 1:

I suggest you to run the Windows Memory Diagnostics Tool and check if it helps.

• Press Windows key + X.
• Click Control Panel.
• Open Administrative Tools (in "Large icons" view).
• Double-click to initiate the Windows Memory Diagnostics.
• Click on Restart now and check for problems (recommended).

Let the tool run and check if any memory errors are fixed. Let us know the results if the detected errors are not fixed.

Method 2:

If the issue persists, I suggest you to try the steps in the following article which will help to fix common BSOD errors and check if it helps.

http://windows.microsoft.com/en-in/windows-10/troubleshoot-blue-screen-errors

Hope this information helps. Reply to the post with an updated status of the issue so that we can assist you further.

 

Weird BSOD problem


Hi Everyone,

I have a weird BSOD problem which I cannot solve for a while(it persists still after upgrade to Windows 10 from Windows 7)

The main strange thing about this is that I get BSOD only after cold boot.
So it acts like this:

1. start PC.
2. Get to Windows Logo Screen
3. BSOD
4. Restart
5. Get to menu where I can try to repair or Start NormallyIf I Choose Repair, it will fail to repair and will try to restoreIf I Choose Start Normally, it will start OK, no BSOD, can work normally, games, browse internet, everything is normal.6. Shutdown PC
7. Next time when I start is all over again i.e. Go to Step 1

I have this problem for a while, so what I tried:

1. Another Windows 7
2. Another HDD
3. Only HDD connected
4. Changed RAM
5. Tried with built in GPU
6. Upgraded to Windows 10

Result is the same as above every time.

Please suggest what could be the cause.
Logs collected with DM_Log_Collector, attached.


Thank you

PS. This thread is a continuation of this one: Frequent multiple errors BSOD. Solved - Windows 7 Help Forums the only thing changed is Windows 10 now. instead of Windows 7. If that helps somehow.

 

HP laptop - multiple BSODs

I have an HP Pavilion 15-cs0021na, (Intel i3, 8GB, 128GB SSD) running Windows 10 Home, which exhibits the following characteristics:

• On startup, occasionally completes boot, but within 5 minutes, BSODs. with a random error, e.g. Page Fault, IRQL not equal, Memory Management and so on.
• Repeated attempts to reboot then fail with more random BSODs
• Rarely, it will attempt a Startup Repair – which will invariably fail with another BSOD.
• Wiping the hard disk and attempting to install a clean version of the OS (downloaded from Microsoft using Media Creation Tool to USB stick) will get a little way into the process, then fail with BSOD as above.

What I’ve done:

• Attempted clean install as above.
• Run multiple hardware tests on Memory and SSD - HP’s built-in tests, Memtest86, Seagate disk tools. All tests pass with no errors.
• Updated BIOS from Insyde F.04 to F.22 (HP supplied).
• Repeated clean install, same result.

I have now run out of ideas, and am at a loss to understand what is causing these errors. How are BSODs generated if no Windows installation is present? Is it likely that a hardware component other than RAM or the SSD is causing these?

Any and all suggestions will be much appreciated.