Windows 10: Been having multiple BSOD

6: kd> !analyze -v******************************************************************************** ** Bugcheck Analysis ** ********************************************************************************MEMORY_MANAGEMENT 1a # Any other values for parameter 1 must be individually examined.Arguments:Arg1: 0000000000000403, The subtype of the BugCheck.Arg2: fff

:)

 

Multiple BSOD

Bug Check 0x1A: MEMORY_MANAGEMENT

Bug Check 0x1A MEMORY_MANAGEMENT - Windows drivers | Microsoft Learn

MEMORY_MANAGEMENT BSODs, accompanied by occasional app crashes/GPUTDR.

MEMORY_MANAGEMENT BSODs, accompanied by occasional app crashes/GPUTDR.

The relevant Parameter appears to be 0x41284 which means, A PTE or the working set list is corrupted, which in itself means nothing to most of us poor Windows users. I still wonder if this is not just bad RAM?

Is it possible to remove one stick of RAM for testing purposes and then test all sticks one at a time (that's is you have multiple sticks of RAM, otherwise it is a daft suggestion on my part).

 

BSOD when coming out of sleep, multiple error codes

Thanks for the assistance, I've run all the necessary steps. It looks like there might be an issue found when running that first command. I have also installed all the driver updates recommended by the dell support check.

You can find the logs of the command prompt window in the cmd.log file

cmd logs.txt

 

HP laptop - multiple BSODs

I have an HP Pavilion 15-cs0021na, (Intel i3, 8GB, 128GB SSD) running Windows 10 Home, which exhibits the following characteristics:

• On startup, occasionally completes boot, but within 5 minutes, BSODs. with a random error, e.g. Page Fault, IRQL not equal, Memory Management and so on.
• Repeated attempts to reboot then fail with more random BSODs
• Rarely, it will attempt a Startup Repair – which will invariably fail with another BSOD.
• Wiping the hard disk and attempting to install a clean version of the OS (downloaded from Microsoft using Media Creation Tool to USB stick) will get a little way into the process, then fail with BSOD as above.

What I’ve done:

• Attempted clean install as above.
• Run multiple hardware tests on Memory and SSD - HP’s built-in tests, Memtest86, Seagate disk tools. All tests pass with no errors.
• Updated BIOS from Insyde F.04 to F.22 (HP supplied).
• Repeated clean install, same result.

I have now run out of ideas, and am at a loss to understand what is causing these errors. How are BSODs generated if no Windows installation is present? Is it likely that a hardware component other than RAM or the SSD is causing these?

Any and all suggestions will be much appreciated.