Windows 10: Behringer USB Mixer with USB Audio Codec crashing

The exact same problem i am experiencing is described in another question already. But the link to the solution is not working anymore.I have the "Behringer Xenyx q1202 USB" as my microphone input device. At random points the Audioinput crashes. Workaround:Current solution is to replug the usb of the mixer. Tried following:Already did a clean install of Windows 11. Symptoms:The mixer is connected via a docking Station. But all other devices, like the second mixer, mouse, and keyboard do not experience any problems. USB device doesnt disconnect Audio device still shows up, but no input is dete

:)

 

Behringer USB Mixer with USB Audio Codec crashing

Hey folks,

So I recently bought a Behringer XENYX Q502USB to connect my microphone with my PC
over USB. Now I have a big issue with it:

The Mixer is connected over USB to the PC. Itself is receiving the audio from the Mic (which I can tell by the LED's) and it is also recognized by the PC (can be recorded and stuff's). Now, on apparently random times, the input to the PC just cuts off. The
Mixer itself is still receiving the sound, but there's nothing coming into the PC. I monitored the audio directly to my headphones by enabling the monitoring in the Audio Device Settings to go sure it happens randomly.

To fix the problem I have two options: either reconnect the USB cable or deactivate and activate the
USB Audio Codec Device in the audio settings. Then it works again for a random amount of time and it starts all over again.

I've already sent it back to the seller to let him check and he couldn't find anything wrong with it. I played with most of the settings, completely removed anything with "USB Audio" in it from the device manager to force reinstallation, tried several USB
ports and still cant tell any changes at all. There's no special drivers for the device either.

I'm at the end of my knowledge. Any help is appreciated, no matter how simple or complicated. I know my PC very well.

Oh yeah, the PC: Custom Build, Win10, no special Soundcard in it.

 

audio codec

Thanks for your input.The mixer is a behringer 302usb.

I have changed sound settings to usb codec clicking on speaker symbol indicates that the output is 100% usb codec,but the internal speakers or jack speakers are still connected and there is no output to the usb.

I have even disabled the internal/jack speakers so they do not work but still no audio from usb to mixer.

I have also updated drivers

Derrick

 

USB Audio Codec Driver

After following all these steps, my usb audio device still does not work. In Settings > Connected devices it list USB Audio Codec Driver is unavailable.