Windows 10: Best Computer Cases of 2015

Read more: Best Computer Cases of 2015 - TechSpot

 

I own the Corsair Air 540 for quite some time now and I am fully satisfied from its performance and its looks. *Smile
It is the first chassis I ever owned which separates the PSU from all the rest - I love this concept - and the two "thingies" it has on the bottom (do not recall their name now -- too bored to Google), where I plug my SSDs have saved me! The airflow is amazing and my temps have always been very good to excellent. My chassis' compartment temps are always 1-2 Celsius above ambient temperature and in the winter time, without the A/C running, they are equal!

A couple of flaws that it has:
- it is not advised to place [two] 140mm fans on the front panel because an airplane turbine noise is created [when spinning above 1300 RPM). No big deal, 3 x120mm as I have them is much better anyway!

- if one would wish a Push/Pull setup for his/hers AIO he/she would have to place the two extra fans on the exterior top of the chassis (and take their cables from the outside backside).

It does not have any other flaw.

*Smile

:)

 

Best N73 Case?

Somthing akin to
this? I've never had much luck with the silicon cases. They always seem to get sticky.

 

Best N73 Case?

I've been looking at case options for my N73. After having picked up a Krusell case and finding that its fit was less then good I've started looking at the more up scale brands such as Noreve.

The
Noreve case is almost perfect, but it seems to not have an opening for the pop-port, rendering it of limited use.

Also an option is a Bugatti case, but thats realy more of a holster then somthing to protect the phone when its in use.

Anyone have any opinions?

 

I like my Corsair 760T a lot too. I also liked my Antec 300, but I (being the complete nerd I am) kept taking the side panel off so I could admire the innards from my easy chair where I sit when I am not using the PC. When I saw the whatever it was that described the new 760T, I had to check it out.

The entire side panel on the 760t is a window! It's polycarbonate, too... not the much more easily broken acrylic. I liked that it opens with a latch and can easily be used with the hinge or removed.

It also solves one of my real annoyances... fan/radiator mounts on the top panel that have no block offs. While I understand the usefulness of these, I also can imagine drinks spilling into the vent... and with my setup, I have not seen any temperature difference when using the upward-blowing fans than with the top grille blocked. The 760t has a nice-looking top panel that holds in place with magnets, and nicely blocks the top vents if you are not using them.

It ticks all the other boxes... good cable routing, modular hard drive cages that can be installed away from the front fans so they don't restrict incoming flow, an easy to access, integrated front filter, an easily-accessed filter for the PSU on the bottom of the case, good airflow, nice fit and finish... it was a good choice.

Corsair's been doing some good stuff lately... I have a lot of their products. I wish their M95 mouse was as durable as the M90 it replaced, but otherwise, I have never had any problems with their products.

 

Another fan of the Corsair Air 540. I love that case!

 

Thanks Shawn.. Good information that I can use.

Jeff

 

I had a look but none of them really grabbed me? In OZ we seem to get more of the ugly cheapies.
One other thing that hurts buying a case in OZ is the AUSTRALIA tax, even on cases. *Sad

I am still using my old ThermalTake case and I like it. http://www.extremetech.com/computing...60-case-review

 

Can't really see buying something fancy that only I would probably find wonderful. . .a plain box works for me, besides with the new imac 5k 27" now setting on my living room desk with (windows 10 insider program in Boot Camp Mode, see no reason for a truly fancy PC Box. . . my 2cents. . .*Smile

 

Hi Folks

I'm not sure whether to post onto this thread, or start a new one.

I'm just in the process of a new build, I've got my components ordered, plus a new chassis to put them in, the Define R5

I'm wondering if I can create a positive pressure environment, inside the case.

Included with the case, are two Fractal 140mm fans, one as intake on the front, the other exhausting out the top rear.

This case, like others around today, is well engineered to fine tolerances, but intentionally has gaps for air getting in the case. However, it seems to have less than most, which is connected to it's silent functionality.

I have two Noctua NF-P12 120mm fans, and two Akasa Apache 120mm. I'm thinking thing that both types are high static pressure fans.

Given that, I can use either the 3, or 5 tray, drive caddy.

If I put the two Noctua's in the front vent, whichever drive bay caddy I use, the Noctua fans will push cold through the drive bays, and into the body of the case.

As there is only one of the Fractal fans exhausting, and we assume it can move less air out, than is coming from the two Noctua's at the front

If I then, just leave the Fractal at the back, block the floor at the middle, and the vent beside the card blanks, in the rear panel, then more air will be entering the case than is leaving, especially if the Fractal fan is not that effective.

Would I then have positive pressure, inside the case, air will be forced through every "hole" left in the case? Thereby keeping everything cool, and dust free. Any dust coming into the case would be repelled by the direction of the airflow.

I could even mount one of the Apaches, in the middle of the floor, this would increase airflow up to the GPU, and then across the mobo and out.

I would of course leave all the "moduvents"

I'd appreciate some input on this. What do people think of my plan?

 

I have been wanting a new case since I last posted in here and, the one that has taken my fancy is The Cooler Master 5 series Pro. I will have to save a while for it but it WILL be worth it. *Smile
http://www.coolermaster.com/case/mid...rcase5-series/

 

I'm still using an Antec 300 Illusion... been a nice case, a little cramped for my motherboard, but it fits and works.

 

Have a Fractal R4 I built to a fairly high spec, i7 included, and have made no modifications or added fans.
This computer is almost silent, and does not overheat.
You are thinking way over the top, unless you are planning to light a fire inside it.
Have faith in the design capabilities of Fractal.

 

Just built a system using the Thermaltake Core P5. It's an open case and it is very easily customised to your end needs. Under $200 so reasonable on price for the size of the case and the options it presents. The case can be configured to stand up, lay flat or even wall mounted.

 

@johnwillyums

I don't know what you would really want.. a flashy case to show off to others or a nice basic black case that has the features you need. For me at least, I go for the basic black case since I don't need to show it off to anyone and I want to put that extra money into other parts/software.

My 2c.. good luck in your search.
Jeff