Windows 10: Black screen after selecting USB to install Windows 11 from

So I have just finished building my PC, and thankfully it turned on ok, and boots into the bios just fine. However, when I plug in my USB drive, containing the windows 11 installation I got it from the windows 11 installation media, and then select it in the boot menu F11, the screen simply turns black, but the PC stays on. I have TPM 2.0 enabled, UFEI enabled, SATA set to AHCI. I have tried it with Secure Boot enabled and disabled. My specs are:AMD Ryzen 5 5600MSI B550M Pro VDH WifiGigabyte RTX 3060ti32GB DDR4 ram1TB Crucial P3 Plus M.2 NVMEThis is really confusing me, so any help is grea

:)

 

Installing windows off of a USB stick

Step By Step from vista:
From admin cmd prompt

1. diskpart
1a. list disk
2. select disk 1 (replace 1 with your usb drive)
3. clean
4. create partition primary
5. select partition 1 (replace 1 with your usb drive)
6. active
7. format fs=fat32
8. assign
9. exit

Copy Windows Vista's DVD ROM content to the Flash Drive

xcopy d:\*.* /s/e/f e:\ (d being your vista cd and e being your usb stick)

And that's it, boot off your usb disk

 

Windows 10 USB Installation Black Screen


The black screen is usually the result of not fully-compatible graphics drivers. Restart the computer several times before it fully loads Windows. Eventually you will see the troubleshooting screen. Select Advanced startup options and then Safe Mode. When in Safe Mode, click on the search icon and type device. Click to open Device Manager. Expand the display adapters and right-click on your adapter. Select Update drivers and then the last option at every step until you see a list of adapters. Uncheck the "show compatible devices" box to see all brands. Go to standard display adapters and select Microsoft Basic Display Adapter. Windows may warn you they cannot verify the driver is compatible with your device. Install anyway. When complete restart the computer and let it load normally. It should load with basic graphics so you can see the desktop. Once there download the latest driver for your graphics card and install it. You should be OK.

 

Black screen after 'Starting Windows' sequence

Sounds like the old... windows black screen of death.

Try this quoted from "VisiHow" article "Repair Windows 7 Black Screen of Death":

They, also, have some other options there, too.
Google search and you will find a lot of the "Windows Black Screen of Death with cursor" fixes.