Windows 10: Blue Blank Screen while trying to install W10 on brand new PC

Hi, Just got new PC, I have new W10 Pro separately on pendrive. When I tried to boot up installation I got blue screen for around 30 sec and computer had shut down. See here, I recorded it https://youtu.be/j4oI3y8_-X4 It happened 3 times. After second I got fatal error that my hardware and/or software might have been damaged. After fourth time I got error on blue screen saying something like my PC run into issues and it will be restated. Than again blue screen - shut down. And after that Windows 10 installation finally started. Now system is installed and all seems to work fine. I

:)

 

Windows booting to blank screen after safe mode

Click these keys whenever you see a black screen:
Windows logo key + Ctrl + Shift + B > report what you see and hear

See if you can boot to the BIOS using the information in this link:
List of PC brands with their corresponding hot-keys

List the installed antivirus software.



See this link for additional troubleshooting steps:
https://support.microsoft.com/en-us/...-screen-errors

 

Installation Problem - Blank Screen on New PC Build

Ugh. I'm trying to install Windows 10 on a brand new PC I just built; part list below.
I boot from the W10 flash drive after entering BIOS setup, and I'm taken to a screen that says "Loading Files" with a load bar. Once the loading bar fills, the screen goes blank, and stays blank. I can't figure it out. I know a lot of people have had trouble installing W10 and getting a blank screen, but I haven't come across any advice for a brand new build.
[table][tr]Part Component [/tr] [tr][td]CPU[/td] [td]Intel - Core i5-6500 3.2GHz Quad-Core Processor[/td] [/tr] [tr][td]CPU Cooler[/td] [td]Rosewill - RCX-Z775-LP 33.5 CFM Sleeve Bearing[/td] [/tr] [tr][td]Motherboard[/td] [td]MSI - B250M PRO-VDH Micro ATX LGA1151[/td] [/tr] [tr][td]Memory[/td] [td]Crucial - Ballistix Sport LT 8GB (1 x 8GB) DDR4-2400[/td] [/tr] [tr][td]Storage[/td] [td]Samsung - 850 EVO-Series 500GB 2.5" SSD[/td] [/tr] [tr][td]Graphics[/td] [td]EVGA - GeForce GTX 1050 Ti 4GB ACX 2.0[/td] [/tr] [tr][td]PSU[/td] [td]SeaSonic - 520W 80+ Bronze Certified Fully-Modular ATX Power Supply[/td] [/tr] [tr][td]Optical[/td] [td]Asus - DRW-24B1ST/BLK/B/AS DVD/CD Writer[/td] [/tr] [tr][td]Network Adaptor[/td] [td]TP-Link - TL-WDN4800 PCI-Express x1 802.11a/b/g/n Wi-Fi Adapter[/td] [/tr] [/table]

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??