Windows 10: Blue Screen Crashes after upgrading RAM

I have a Dell inspiron 3567 with following configuration

Processor : i5 7th gen

Graphics Card : 2gb AMD Radeon

Ram : 4gb + 2gb = 6gb


Then I upgraded ram configuration and replaced 2GB ram with 8GB ram with required frequency and other specs. But now with now total of 12GB of ram, my laptop runs 1-2 hours without any problem and suddenly crashes down, everytime with different blue screen error code like irq_not_less_or_equal, system_exception_thread_not_handled, system_service_exception, etc.


I tested my memory with memtest and Windows Memory Diagnostic, and no errors were found. But I still kept getting blue screen crashes after using laptop for sometime.


Currently I am using 8GB + 2GB combination and this is working quite well without any kind of errors. Can somebody please guide me what is the problem with my laptop ?


This is the link of generated dmp files : https://1drv.ms/u/s!ApNGSFGib_-Ai0_aSSqwrnStzO7s?e=DQdRCP

:)

 

Blue crashes after RAM installation

Hi,

The blue screen error that you encountered may indicate a possible driver or hardware compatibility issue. To isolate your concern, we'd like to ask the following:

• Which Windows build version is running on your device? Type winver in the search box and press
  Enter to help you identify.
• Are you getting any error messages?
• What are the troubleshooting steps that you've performed to resolve your concern?

As an initial step to troubleshoot the blue screen error, we suggest that you follow the steps provided on this
support article. Follow through the guided walk through to view the appropriate steps. Once you're done,
check if the issue persists.

We'll appreciate if you can send us an update.

 

Crash/blue screen

Hi

I assume from the title of your post Crash/Blue Screen that the PC has crashed and produced a *BSOD=[Blue Screen Of Death] =Blue Screen; and that the PC recovered from this; if and when you see the Blue Screen write the Stop Code down; recover the PC or use one that is working to access the net and look up the Stop Code.

nb: You may be able to view this with a [*BlueScreenView] application, google for this.

Edit Link - Blue screen of death (STOP error) information in dump files.

Description
===========

BlueScreenView scans all your minidump files created during 'blue screen
of death' crashes, and displays the information about all crashes in one
table. For each crash, BlueScreenView displays the minidump filename, the
date/time of the crash, the basic crash information displayed in the blue
screen (Bug Check Code and 4 parameters), and the details of the driver
or module that possibly caused the crash (filename, product name, file
description, and file version).
For each crash displayed in the upper pane, you can view the details of
the device drivers loaded during the crash in the lower pane.
BlueScreenView also mark the drivers that their addresses found in the
crash stack, so you can easily locate the suspected drivers that possibly
caused the crash.

atb

Law-II

 

blue screen issue


after monthes of running system it was fine then on windows 7 it blue screened after looking it over myself and getting advice from local pc shop they suggest upgrading os will fix the issue so I upgraded to win 8.1 and along followed the blue screens now again upgrading after more advice I'm on win 10 and the bluescreens followed as a bad pool error rebooting I have included the requested report please help as spending the $150 the local pc shop wants is my next step