Windows 10: Blue Screen when Booting - "Your PC/Device needs repaired"

File\Boot\BCD Error C ode- 0x0000034 , and goes no further. Cant get it to boot in safe mood. How do Iget around this?

:)

 

Blue screen and stop code

Hi
Jeferis,

There are a lot of factors for this matter to occur. To isolate the issue, we have some questions for you:

• 
  What activity have you done to
  trigger the NTFS and FAT FILE SYS loop?
  
• 
  were there any error messages?
  
• 
  What troubleshooting steps have you done so far?
  

It is possible that the
Boot
Sequence were corrupted by the previous activity which
triggered the Blue Screen Error and the loop. We recommend that you perform these
suggested troubleshooting
and see if there are any changes:

Startup Repair.


To access the
Startup Repair Screen, turn off the
PC 3-4 times(force shutdown),
while on the Blue screen Error. This will route you to the
Startup repair screen:

Advanced Boot Options > click Troubleshoot > Advanced options > Command Prompt

and run the following command:

Run SFC Scan:  

SFC
will
scan
and
run
an
automatic repair
to any
corrupted system files
that it will detect. We suggest that you perform it twice. To run an
SFC scan, follow these steps:  

• 
  Run
  Command Prompt as Administrator.  
  
• 
  Type
  sfc /scannow
  and hit
  Enter.   
  

Boot Record:

This will fix the corruptions on
boot records or boot
sequence. To run this command, follow these steps:

• 
  Run
  Command Prompt as Administrator.
  
• 
  Type the following command:  
  
  • 
    Bootrec /fixMBR  
    
  • 
    Bootrec /fixBoot
    
  • 
    Bootrec /rebuildBCD
    

Update us on how it goes.

Regards.

 

Startup Blue Screen

Hi Jon,

Startup blue screen error(s) can occur if a problem causes your PC to shut down or restart unexpectedly. It could be due to the following:

• Outdated device software drivers
• Corrupted Windows update system files
• Software/Security conflicts

We would like to know some information:

• Did you get any blue screen stop error codes?
• Have you tried booting in Safe mode?

We suggest that you check this
article about troubleshooting blue screen errors and follow the troubleshooting steps provided there.

We will wait for your response

 

BLUE SCREEN,COULDN'T repair PC

Hi Abdurachmanov,

Thank you for posting on Microsoft Community.

We are sorry for the inconvenience caused to you. We will help you in resolving your issue.

Before assisting further, I would like to ask you few questions regarding the query:

• What was the error message displayed before?
• Did you get any error code?

Reboot your PC and check if you are facing similar issue.

If the issue persist, I suggest you to re-perform startup repair from the Windows 10 installation disk by following the steps below.

Startup Repair is a Windows Recovery tool that can fix certain system problems that might prevent Windows from starting. Startup Repair scans your computer for the problem, and then tries to fix it so your computer can start correctly.

Startup Repair is one of the recovery tools in the System Recovery Options menu. This set of tools is located on your computer’s hard disk, and on the Windows Installation disc.

If you are on Windows 10, I suggest you to repair your computer by creating a Windows 10 Bootable media (i.e. USB or DVD) using
Media Creation Tool. Once you're ready with Bootable Media, follow the below mentioned
steps.

• Insert the Windows installation disc in the disc drive or connect USB media and then start the computer.
• Press a key when the message Press any key to boot from CD or DVD appears.
  
  If your PC does not detect the media automatically
  • During the restart process, read the screen for any instructions that explain how to interrupt normal startup and enter the basic input/output system (BIOS) setup utility. Most PCs use the F2, F10, ESC, or DEL key to begin the BIOS Setup.
  • Look for a tab in the BIOS Setup Utility that is labeled Boot Order,
    Boot Options, or Boot. Following the directions on the screen, use the arrow keys to go to the
    Boot Order, then press Enter.
    
  • Locate the CD, DVD, or USB flash drive (this might be called Removable Device) in the Boot list. Following the directions on the screen, use the arrow keys to move the drive up so that it appears first in the Boot list. Press
    Enter. The boot order sequence is now changed to boot from the CD, DVD, or USB flash drive.
  • Press F10 to save your changes and to exit the BIOS Setup Utility. Select
    Yes in the confirmation window. The PC will restart. Allow the PC to restart normally. The scan will take a few minutes and remove any malware that may be infecting your computer.
• Select a language, a time, a currency, a keyboard or another input method, and then click
  Next.
• Click Repair your computer.
• Click the operating system that you want to repair and then click
  Next.
• On the Choose an option screen, select Troubleshoot. Select
  Advanced options from the window and click on Startup repair
  option.

If the issue persist, I suggest you to perform System Restore
under Advanced Options and follow with onscreen instruction to repair your computer.

Hope this helps!

Get back to us with the answers to the above question to assist you further on this query. Your reply is most important for us to ensure that we assist you accordingly.

We are happy to assist you with any issues pertaining to Windows.

Thank you.