Windows 10: Bluescreens and Crashes since Windows Reinstallation

Hi there!Since I've upgraded my PC I'm having crashes and WHEA_UNCORRECTABLE_ERROR Bluescreens.It all started last weekend, when I've got a new M2 SSD and wanted to move my Windows over there. I wanted to clone the drive over there, which didn't go well and forced me to completely reinstall Windows. Since then I'm encountering these crashes, mostly about 3-6 hours of the machine running, or when under heavy load work, gaming.I've tried:- different system checks sfc/ scannow- memory checks chkdsk, memtest86- driver verifier- updates, of course- resetting Bios, installing latest Bios ver

:)

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?

 

Constant Bluescreens/Crashes

New Build and having constant bluescreens / crashing

Playing tf2 crash, run prime 95 within 60 seconds crash.

 

Bluescreen Crashes in Windows 10

There are a few things that I notice with these errors, they are nearly all hardware 0x124 errors which are difficult to troubleshoot because there is so little information.

Most of them occur when the Norton Security process is running so a first step would be to uninstall Norton and just use Windows Defender while we are troubleshooting.

There was one different BSOD error: 0x18 Reference by Pointer
Probably caused by : BHDrvx64.sys ( BHDrvx64+114761 )

You need to update or rollback your Symantec Heuristics Driver. Maybe this is part of the Norton install so it may be removed anyway.

Check if there has been any improvement and if not then you will need to work through your hardware:



STOP 0x124 Troubleshooting [/i] Read carefully before proceeding.



Warning

If you're overclocking your system, revert back to stock clocks now.





Note Test the system once the overclock is removed before continuing with the steps outlined below.

Part One: CPU Stress Test
Part Two: MemTest86+ RAM Diagnostic
Part Three: Hard Drive Diagnostics
Part Four: GPU Stress Test




ONE [/i] CPU TEST
*Arrow Run Prime95 to stress test your CPU. Prime95 - Stress Test Your CPU - Windows 10 Forums



Warning Your CPU temperatures will rise quickly while under this stress test. Keep a keen eye on them and abort the test if overheating occurs.




TWO [/i] RAM TEST
*Arrow Run MemTest86+ to analyse your RAM. MemTest86+ - Test RAM - Windows 10 Forums



Note



MemTest86+ needs to be run for at least 8 passes for conclusive results. Set it running before you go to bed and leave it overnight. We're looking for zero errors here. Even a single error will indicate RAM failure.




THREE [/i] HDD TEST


Note Please run HDTune first, in the order posted!
*Arrow Run HDTune to

• check the health,
• scan for errors, no quick scan but full scan
• run a benchmark.

It may take some time, but please take the time you need to perform it properly.
When above is done please make screenshots of the following

• the health,
• the error scan,
• the benchmark incl. following
  • transfer rate,
  • access time,
  • burst rate,
  • cpu usage.

*Arrow Run chkdsk




FOUR [/i] GPU TEST
*Arrow Run Furmark to stress test your GPU. FurMark - GPU Stress Test - Windows 10 Forums



Note Run Furmark for around 30 minutes.


Warning Your GPU temperatures will rise quickly while Furmark is running. Keep a keen eye on them and abort the test if overheating occurs.


Report back on all the tests as you do them - take your time - there is no need to get them all done immediately.