Windows 10: Bluescreens caused by various driver errors. amdppm.sys and dxgkrnl.sys showing as cause in...

013024-6609-01.dmp 1/30/2024 1:31:46 AM DRIVER_IRQL_NOT_LESS_OR_EQUAL 0x000000d1 00000008`0000011c 00000000`00000002 00000000`00000000 fffff805`dc2216d9 amdppm.sys amdppm.sys+16d9 Processor Device Driver Microsoft® Windows® Operating System Microsoft Corporation 10.0.22621.2506 WinBuild.160101.0800 x64 ntoskrnl.exe+416bc0 C:\Windows\Minidump\013024-6609-01.dmp 16 15 22621 1,260,276 1/30/2024 1:32:42 AM 013024-7328-01.dmp 1/30/2024 12:51:20 AM SYSTEM_SERVICE_EXCEPTION 0x0000003b 00000000`c000001d fffff804`546661c7 fffffd85`0e865d20 00000000`00000000 dxgkrnl.sys dxgkrnl.sys+2661c7 DirectX

:)

 

QCAMAIN1.SYS CAUSING BSOD

This was probably caused by the following module:
qcamain1.sys (Qcamain10x64+0x108678)

Bugcheck code: 0x1D3 (0x333, 0x0, 0x0, 0x0)

Error: CUSTOM_ERROR

A third party driver was identified as the probable root cause of this system error. It is suggested you look for an update for the following driver: qcamain1.sys .

Google query: qcamain1.sys CUSTOM_ERROR

Using WhoCrashed I found this thread: Redirecting however without
solution, locked.

I did get BSOD almost everytime I moved the laptop.

This worked for me:

unscrew wifi module, push a little into the socket. Screw in. DONE

 

DRIVER_IRQL_NOT_LESS_OR_EQUAL (Netwbw02.sys)

The minidump files showed DRIVER_IRQL_NOT_LESS_OR_EQUAL (d1) stop errors caused by the Netwtw04.sys:

BugCheck D1, {108, 2, 0, fffff8032497f5c2}

Unable to load image \SystemRoot\System32\drivers\Netwtw04.sys, Win32 error 0n2

*** WARNING: Unable to verify timestamp for Netwtw04.sys

*** ERROR: Module load completed but symbols could not be loaded for Netwtw04.sys

Probably caused by : Netwtw04.sys ( Netwtw04+4f5c2 )

The Netwtw04.sys is a driver for the Intel wireless.

Try installing the 64-bit drivers in the following link from Intel (version 19.70.0):

https://downloadcenter.intel.com/do...less-Software-and-Drivers-for-Windows-10-?v=t

 

BSOD while using the internet. error (L1C63x64.sys)


Hi trainman81,

Welcome to the 10forums.

Daemon tools, Alcohol 120% and Power Archiver Pro uses SCSI Pass Through Direct (SPTD), which is a well known cause for BSOD's.
Please remove Daemon Tools and run the SPTD pass through remover.

1. Uninstall Daemon Tools
2. Download the SPTD standalone installer and follow these steps:
   • Double click the executable to open it
   • Click on the button shown below

If the button is grayed out, like in the image, there is no more SPTD installation on your system, and you can close the window


AVG is trying to request data from the internet, which is why the network driver is marked as the cause.
Code:

Code:

*** WARNING: Unable to verify timestamp for L1C63x64.sys *** ERROR: Module load completed but symbols could not be loaded for L1C63x64.sys 0: kd> lmvm L1C63x64 start             end                 module name fffff801`89700000 fffff801`89722000   L1C63x64 T (no symbols)                Loaded symbol image file: L1C63x64.sys     Image path: \SystemRoot\System32\drivers\L1C63x64.sys     Image name: L1C63x64.sys     Timestamp:        Mon Apr 01 05:15:17 2013 (5158FBC5)     CheckSum:         000245C4     ImageSize:        00022000     Translations:     0000.04b0 0000.04e4 0409.04b0 0409.04e4

AVG drivers that have been flagged
Code:

Code:

*** WARNING: Unable to verify timestamp for avgwfpa.sys *** ERROR: Module load completed but symbols could not be loaded for avgwfpa.sys *** WARNING: Unable to verify timestamp for avgfwd6a.sys *** ERROR: Module load completed but symbols could not be loaded for avgfwd6a.sys

Please uninstall AVG and see if it helps
Uninstall AVG | AVG
It is further recommended to check your Qualcomm network driver for updates, its driver is not supported for Windows 10.
Driver Reference Table - L1C63x64.sys