Windows 10: Bluetooth audio device is connected as Voice only

For some reason, windows really wants my bluetooth device to be input only. It doesn't have a microphone tho, as it is my stereo Teufel Combo 42 with bluetooth dongle.Here's what i have to do every time i connect it after booting the PC:* bluetooth devices => remove device* turn stereo off and back on again otherwise the device isn't removed from the list* connect new device => reconnect the stereo* it's now detected as both voice and music playback device* ...but also switches this device to be default for everything* switch main audio back to my headset* start playback of music sp

:)

 

Bluetooth Speaker - Connected Voice (Poor Audio Quality)

I had no problem with device. It works with Ipad and phone.

Previously when I connected the device It says "Connected Voice And Music" now It says only "Connected Voice".

And It has low voice and poor audio quality.

Bluetooth Speaker : Anker Soundcore Motion Plus

PC : ASUS N552VW.

OS : Windows 10

Is it related to bluetooth problem?

Check out Device Manager;

https://www.dropbox.com/s/kv2ffarkib...nager.PNG?dl=0


How can I fix it?

 

Bluetooth device always connected as voice instead of voice and audio

My bluetooth headset used to work just fine. But then when i tried to connect my bluetooth device, it's always connected as voice when it usually say connected to voice and audio. It's working perfectly back then when i connect and it's connected to voice
and audio and now it's just connected to voice only instead to voice and audio. So if i play music or something, it will play the sound in handfree mode like when we are in phone calls.

Please help me fix this. It's annoying thoo.

 

Cannot connect to Bluetooth audio devices (only) under 21H1.

I had no problem connecting Bluetooth audio devices while running Windows version 20H2, and had 3 different audio devices paired and working normally. Upon upgrading to the latest Windows 10 version (21H1, 19043.1348), they can no longer connect.

There's nothing wrong with the devices. My 2nd system is running 20H2 and is connecting fine with them.

On my primary system running 21H1, I go to the Bluetooth settings screen, see my paired devices in the list. I turn on a Bluetooth audio device... and nothing happens. Previously the laptop would auto-detect the audio device and I'd be good to go. So I select the paired audio device in the list, see the option button to "CONNECT" and press it. IMMEDIATELY, I'm given this message: "That didn't work. Make sure your bluetooth device is discoverable." It's obvious it's not even trying. It's an instant response. On my 20H2 laptop, when I try to manually connect to a Bluetooth audio device that's not turned on, it takes about 20 seconds or so until the "didn't work" message to appear. It's clearly trying.

NOTE: I have a mouse device connected via Bluetooth and it's working perfectly fine. It's only audio devices that fail.

Another vexing related issue -- if I try to remove any of my Bluetooth audio devices from the paired list, I get a "Remove Failed" message and nothing happens.

Troubleshooting: Went to Devices --> Bluetooth. Did a View of hidden devices... and yes, there were duplicates of these devices listed. I deleted all of them. I rebooted and while they are absent from the Devices list, they're still showing up in the Bluetooth interface and behaving as before. I ran the Bluetooth troubleshooter that claimed to find a problem and fixed it, but rebooting showed that not to be the case.

Either something appears to be wrong with 21H1, or I have some screwy configuration conflict going on.. I've got Realtek Bluetooth hardware. I have uninstalled Bluetooth and reinstalled the Realtek drivers. No help. Upgrading to 21H1 was long and tedious--I don't want to roll back to 20H2. Is there anything I can try to fix this?

Thanks!