Windows 10: Bluetooth device cant be removed or deleted

I have a pair of jbl reflect flow earbuds that will not have their connection removed no matter what i try 1 removing device normally does not work2 removing device via control panel does not work3 deleting the actual registry keys does not workthe buds themselves work fine with other devices however on my win 8.1 surface 3 pro they cannot be connected, disconnected, or removed. they are non functional and any attempt at getting windows to forget the device or re-pair it is met with a "driver error" or "removal failed" message with ABSOLUTELY NO ADDITIONAL OR HELPFUL INFORMATIONhow do you r

:)

 

Cannot use bluetooth device

1 Pairing is done in Settings, Devices
1.1 You click on Add Bluetooth or other device
1.2 You choose Bluetooth
1.3 If there is a pairing button on the bluetooth device itself then you press that now. You need to check the instructions for your bluetooth device to see how to do this - several automatically go into pairing mode when they switch on, others have a button that needs to be pressed for, say, 5 seconds.
1.4 The computer detects all available bluetooth devices and you select yours from the list. If yours is not on the list then Windows could not detect it.
1.5 It connects - pairing includes connecting
1.6 The computer sounds a buzz in the earpiece then displays Your device is ready to go and you click on Done
1.7 The device is shown in the devices list below the subheading Audio and it shows it as connected
1.8 The device should also appear in Control panel, Sounds, Playback tab
1.9 The device should also appear in Control panel, Devices & printers
1.10 {I just paired some bluetooth earphones as I typed so I could make sure these notes were correct} You use a music player and the sound comes out of the bluetooth earphones

2 If this is not happening for you then go to Contol panel, Devices & printers
2.1 Right-click on the device & select Remove device
2.2 You can now try pairing from scratch again
2.3 Several other users have reported that only removing the device with Bluetooth command line tools - BluetoothInstaller allowed them to re-pair again [see xzion's guidance below]
2.4 Yet others reported that only the KeithM code or Bungee's guidance worked for them [see below]

3 Where is this all going wrong for you?
[I assume we are definitely talking about bluetooth headphones/earphones. I understand that WiFi ones do also exist.]


4 Additional guidance -

Unpair a Bluetooth Device - TenForumsTutorials
Connect a Bluetooth device in Windows - Windows Help

Steps to completely remove a belutooth device so pairing can be done again [post #9, xzion] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #22, KeithM] - TenForums
Steps to completely remove a belutooth device so pairing can be done again [post #39, Bungee] - TenForums
Several people registered in TenForums just to be able to thanks xzion, KeithM & Bungee. Apparently, what worked for some people did not work for others so each solution seems worth trying.


Denis

 

Cannot use bluetooth device

mmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmmm

 

Bluetooth device migration.

Hi FredOlson1,

Sounds like a Bluetooth driver conflict to me. Did you make any changes on your laptop prior to the issue? What is the build and version of your Windows 10? In the meantime, kindly follow the steps below:

Step 1: Lets remove the Megacra sound bar from your Bluetooth device list.

1. Select Start > Settings > Devices >
   Bluetooth & other devices.
2. Select the paired Bluetooth device that you want to remove > Remove device >
   Yes.
   
   Restart your laptop.

Step 2: Download and install the latest Bluetooth driver directly from Dell support website.

Step 3: Pair again your Bluetooth device to your laptop. Kindly check for the device manual for the instructions.

You may also want to check this article for the list of troubleshooting steps to fix Bluetooth connection issues.

Kindly update us with the results.