Windows 10: Bluetooth Switch Disapeared. Driver Is Installed,

Hello, I Have Recently Went Into Settings Trying To Connect A Pair Of Bluetooth Headphones. The Bluetooth Switch is Gone And It Says I Do Not Have Bluetooth Turned On. I Know My Device Has Bluetooth Because It Was Working For Until Around 3 Months Ago I Have Had It Since Augest of 2020. Can Someone Please Tell Me Where The Bluetooth Chip Is On The Motherboard So I Can See If It Has Become Disconnected From The Computer?Thanks, D

:)

 

Bluetooth driver error 10 when converted to Windows 10

Hi,

Apologies for the late reply.

Error code 10 is a driver error, as you have already tried to install the drivers I would suggest you to un-install and re-install drivers and check.



Try the following steps:


Follow the steps mentioned below:

• 
  Right on the start icon and click on device manager
  
• 
  Select Bluetooth adapter, right click on it and click on un-install.
  
• 
  Restart the computer,
  
• 
  Now, install the latest drivers from the manufacturer's website.
  
  
  
  Hope this helps.
  

 

Bluetooth switching off

suggest you to follow these steps below 1-Click windows+x and then open control panel.
2- Then open the “Network and sharing center " icon from control panel.
3-Then click on “change adapter settings" from the left top corner of the opened tab.
4-Then from the new opened tab choose " Bluetooth network connection" and right click on it.
5-Then choose "disable” to turn off Bluetooth and again enable to turn on Bluetooth.

If it is set to allow your computer to turn off the Bluetooth device to save power, your Bluetooth can keep disconnecting when in a low-power state. ... Switch to the Power Management Then, uncheck the Allow the computer to turn off this device to save power option. Click OK to save the change.

 

Bluetooth's mobile phone drivers

Hi David,

Thank you for using Windows 10.

I would suggest you to update the Bluetooth drivers as the initial troubleshooting steps and check. Here is the steps:

• Press Windows+X key on your desktop and select
  Device Manager.
• Locate Bluetooth drivers, expand, right click and click on Update.
  

If it doesn’t help, then I would suggest you to uninstall
and re-install the Bluetooth drivers in compatibility mode. Here is the steps:

• Go to your manufacturer’s website and download the
  Driver’s setup file for your computer.
• Press Windows Key + R on your desktop screen to go to run box.
• Type devmgmt.msc and hit Enter.
• Under Driver, expand, then right click and select
  Uninstall.
• If you are prompted to Confirm then Confirm.
• Go to the location where you had saved your downloaded setup files of the drivers and
  right click, then select Properties.
• Select Compatibility Tab.
• Place a check mark next to Run this program in Compatibility mode and select the operating system accordingly from the drop down list.
• Let the driver to install and then check the functionality.

Keep us informed about the status of the issue and let us know if you need further assistance and we’ll be happy to help you.