Windows 10: Bluetooth will randomly lose connectivity

I've been having an issue with a network card that I purchased, it is an Intel AX200, and what is happening is it'll work fine for a few hours but then it will drop all connection, windows continues saying bluetooth is on, and then when I try to turn bluetooth off and on again it doesn't work, and I can't reconnect my headphones. This was a problem I was having in Windows 10, so I completely wiped the drive and updated to Windows 11 and the problem still persists, exact same symptoms. I have uninstalled the device, reinstalled it, updated the drivers, rolled back the drivers, disabled "Allow t

:)

 

Bluetooth Mouse losing connection

Hi Joyce,

It's possible that some settings are preventing your Bluetooth mouse from working properly. We'd like to learn more about your concern so that we could provide the proper resolution. We just have a few questions for you:

• Which build version of Windows 10 is on your computer? To check, click
  Start, type winver, and press Enter. For example, 14393.1066.
• Have you tried pairing the mouse with a different computer to check if it works?

As initial recommendation, we suggest using the built-in troubleshooter, which can find and fix common Bluetooth problems. Follow these steps to do so:

• Click Start.
• Go to Settings.
• Click Update & Security.
• Click Troubleshoot.
• Under Find and fix other problems, select Bluetooth.
• Click Run the troubleshooter.

We look forward to your response and the results of the initial troubleshooting.

 

lose wifi connection when enabling bluetooth. Any fix ?


I have a brand new HP laptop that came with Windows 10 home installed on it.
I have downloaded and applied all updates from MS.

I use a Wi-Fi connection to my Time Warner router.
I have everything setup and things seem to be running fine.

Here's the deal.

I thought I would try and use my blue tooth external speaker. (Just to see what would happen.)
Sooooo.

I enabled Bluetooth.
Start\Settings\Devices\Bluetooth.
After I move the slider (so the status reads (On), ....

I see a message that reads "Your PC is searching for and can be discovered by Bluetooth devices".

Two things happen:
The "search" never seems to end.

And I lose WI-Fi connectivity.

I finally, move the Bluetooth slider to the "Off" position and my Wi-Fi connectivity returns.

I "do" see my external speaker.
And it does work. (As long as "Bluetooth" is enabled.)

But of course, I then have no Internet connectivity and THAT becomes an issue for me.

Any ideas or suggestions as to what I may need to do, would be greatly appreciated.

in Wisconsin

 

My computer loses connection randomly

Hello,

The issue that you are experiencing might be caused by a limited or poor network connection. For us to know more, please answer the following:

• Were there any recent changes prior to the issue?
• Are you getting any error messages or pop-up message?
• For us to have a better image of your concern, can you provide us a screenshot of the issue that you are experiencing?

In the meantime, we suggest running the Network troubleshooter followed by networking commands. To do that, follow the steps below:

• In the search box on the taskbar, type Network troubleshooter, and then select Identify and repair network problems from the list of results.
• Follow the steps in the troubleshooter and see if that fixes the problem.

If that doesn’t fix your connection problem, try these things:

• Reset the TCP/IP stack
• Release the IP address
• Renew the IP address
• Flush and reset the DNS client resolver cache

To run these networking commands in a command prompt window

• In the search box on the taskbar, type Command prompt, press and hold (or right-click) Command prompt, and then select Run as administrator> Yes.
• At the command prompt, run the following commands in the listed order, and then check to see if that fixes your connection problem:

• Type netsh winsock reset and press Enter.
• Type netsh int ip reset and press Enter.
• Type ipconfig /release and press Enter.
• Type ipconfig /renew and press Enter.
• Type ipconfig /flushdns and press Enter.

Get back to us and give us an update.