Windows 10: Boot failure but computer has power

I switched on my 32 bit computer from the power switch on the back ,not from the start-up switch, the power light and my CD player light both came on and the machine is buzzing. My monitor, except for the brand did not show any part of a boot-up. Any ideas what is wrong?

:)

 

New computer, total power failure

Hi,

To resolve the battery issue, we suggest that you follow the steps below:

Method 1: Check your battery saving settings. There’s a chance that the Anniversary Update somehow changed your battery saving settings.

To increase the battery life of your device, check if your power plan is alright.

• Go to Settings > System > Power & sleep >
  Additional power settings.
• Check the brightness settings by going to Settings >
  System > Display

Method 2: Check if your drivers are updated. Battery drain issue can also be due to some drivers not fully compatible with the Anniversary Update. It’s important to have all your drivers updated, to prevent battery drain issue and other problems.

Moreover, if the issue persists, we suggest that you contact your Cube 2-in-1 tablet computer's manufacturer for further assistance.

Let us know how it goes.

 

computer won't boot but has power

Kursah, that 6 steps are granted it always boots at the 6th step (sometimes at the 4th) and I have to remove the ethernet cable every time otherwise I'll have to do countless steps, that's a fact. I do not have Wake On Lan set.

 

Computer keeps re-booting

Hi,

Thank you for your interest in Windows 10.

I suggest you to follow the methods below and check if it helps.

Method 1

Disconnect all the external devices (printers, scanner, USB (universal serial bus) drives, etc...) Except mouse and the keyboard and then check.

Method 2

I suggest you to run in-built Power troubleshooter and check. Follow the steps:

• Press Windows Key + X.
• Click on Control Panel.
• Select Troubleshooting on the left pane, click on
  View All.
• Click on Power to run the troubleshooter.

Method 3

If the above method doesn’t help, I suggest you to reset and restore all of the default Power Plans back to their default settings. Follow the steps:

• Press Windows Key + X.
• Select Command Prompt (Admin).
• At the command prompt, type powercfg -restoredefaultschemes, and then press
  ENTER.
• At the command prompt, type exit to exit the Command Prompt window.
• Restart the computer and check with the issue.

Method 4: Clean boot

Putting your system in Clean Boot state helps in identifying if any third party applications or startup items are causing the issue. You need to follow the steps from the article mentioned below to perform a Clean Boot:

How to perform a clean boot in Windows - Microsoft Support

Note: After clean boot troubleshooting steps, refer to the section "How to reset the computer to start as usual after troubleshooting with clean boot" in the provided link to return your computer
to Normal startup mode.

Hope this information is helpful. Please do let us know if you need further assistance, we’ll be glad to assist you.