Windows 10: Boot failure with latest windows 11 update

Acer expire laptop fails to start blank screen with frozen circular arrow after automatic updating windows 11 2024-12 Cumulative Update for Windows 11 Version 23H2 for x64-based Systems KB5048685. I have to reboot two times first time message 'collecting data to fix problem' but then fails to start and then reboot again before the PC starts

:)

 

Windows 8 failure configuring updates and reverting

I agree 8 is awful! It's not for me though... I replaced a broken screen in a Win 8 laptop that was given to me and I am going to give it for free to someone that can't afford one so they can do homework at home. Yes I took it from 8 to 8.1 back on 10/09/2014. This is what I posted there...

"Great post! I found a similar one. I would like to point out that you may want to edit your OP...

1. Step 1 should read to disable AUTOMATIC updates, not disable manual updates.

2. KB2871398 should really read KB2871389

I would like to say that KB2917499 may also be needed as it was in my case. I also had to run the Windows Update Troubleshooter after installing those 2 updates. After these steps I was able to begin my 8.1 download from the Microsoft store. I don't know if it made a difference or not, but I also went into the Bios and disabled "Secure Boot."

It was a helpful post. Thanks!

 

HP Spectre Folio 13 lost Bluetooth after latest Windows 11 update

After the most recent Windows 11 update, Bluetooth on this HP Spectre Folio 13t-Ak000 CTO stopped working. The computer refuses to report that it has Bluetooth, so no controls are visible. Given the proximity to the Windows 11 update, I am assuming that it is a software conflict rather than a hardware failure. The latest manufacturer's updates are for Windows 10 only.

The following steps were taken, to no avail:

• Airplane mode was turned on and off.
  
• A corrupted device driver, suspected as being the misinterpreted Bluetooth driver, was removed and the computer was rebooted to force a reinstallation.
  
• All Windows and HP updates were installed, including a BIOS update.
  
• System File Checker repaired the OS.
  
• HP's network drivers were downloaded and reinstalled on the system.
  
• The Bluetooth troubleshooter was run but no Bluetooth hardware was detected.
  

I have also posted this report on the HP boards. I have considered looking for the component manufacturer's Bluetooth drivers, if any, but I can't figure out the manufacturer. Any suggestions would be welcome.

 

Windows 8 failure configuring updates and reverting

No, the license only applies to the Windows 8 OEM copy the original owner purchased with laptop, it doesn't magically transform into Windows 8.1 Retail one.

OK, so here's the commonly recommended steps that should help you with your problem.

Before you begin, I would recommend you to download both of these files and save them on your USB drive in order to use it later as the only source of third-party packages:

• http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67259.exe
• http://www2.ati.com/drivers/amd-catalyst-14.4-64bit-win8.1-win8-win7-whql-aug.exe

1. The first step would be to recover the original Windows installation using your hard drive partition (the thing that you've done before, I believe). Follow the steps described here (http://h10010.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c03544793#N258) and see if you missed anything. By the end of this operation, make so that your HP product is not connected to any sort of network.

2. Configure your HP device to boot in "clean" mode as described here (http://support.microsoft.com/kb/929135). Restart once.

3. Run the first file you've downloaded (http://ftp.hp.com/pub/softpaq/sp67001-67500/sp67259.exe) from your just-recovered Windows copy and follow the steps required.

4. Run the AMD package (http://www2.ati.com/drivers/amd-catalyst-14.4-64bit-win8.1-win8-win7-whql-aug.exe). Choose the "Advanced" installation option in order to be able to opt-out the "AMD/Raprt App" and "HydraVision" packages.

5. Establish an Internet connection. Run "Windows Store" tile from your Start screen, and select "Windows 8.1" package.

6. Once you're done with your migration from Windows 8 to Windows 8.1, you can install all the critical updates offered by Windows Update, which would be driver software, then Windows 8.1 Update package (KB2919442 > KB2919355 > KB2932046 > KB2959977 > KB2937592 > KB2938439 > KB2934018), "August" Update (KB2993651 > KB2975719 > KB2993100 > KB2979582 > KB2990532 > KB2995004) and .NET Framework 4.5.2 (http://www.microsoft.com/en-us/download/details.aspx?id=42642).