Windows 10: Boot Issues

Hello. My PC operates on windows 10. Some months ago, it started having this problem by suddenly shutting down. The first time this happened, it went off at 20% battery, and when I tried booting it, I realised the legacy support had been disabled, and it wouldn't boot unless I enabled it. I did. The next this occurred, it was on 30%, with the same legacy support thing. The sudden power off graduated gradually, and a week ago it would suddenly go off at 90% battery. Now, it wouldn't even come on, until it's plugged in, and I enable the legacy support which keeps turning off.

:)

 

AMD FX OC'ers Club

That's what the auto setting will do since you're over the 1333 mark it jumps to the next step which isn't listed or officially supported I assume by that ram.

At this point though I would suggest dropping the multi one step or .5 so that we can get something stable and possibly take the heat issue out of the picture for now.

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

laptop doesnt boot automatically

This is what happened.

1. Did a repair install and later disabled hibertnate in CMD.
2. Enabled legacy option ROM in BIOS.
3. After a few times startup ( i used the system in such mode for 5 days), changed boot option back to default.
4. Vola!! It boots automatically to win10 without any keypress. Tested it with many starts to confirm the same.
5. Re-enabled hibernate option using CMD and later selected Fast Startup.
6. System booted normally, without the need for any keypress.

I do not know exactly whether such steps resolved the problem or what else happened, hence cannot suggest above steps.

Many thanks to all members who helped to troubleshoot problems.