Windows 10: Boot looping issues.....

When I start my laptop it says system restart in the left corner and flashes a screen with a lenovo sticker and this happens infinite times. I have to go to bios and exit which properly boots into windows. I had ubuntu dual booted previously which I deleted for some reasons. I also deleted ubuntu directory in efi. How to get rid of boot loop?

:)

 

HP Laptop Boot Loop

I am encountering a boot loop problem with my HP laptop. Upon startup, it shows the HP logo and loading dots for about 11 seconds, then goes to a blank screen for approximately a minute before automatically restarting. The power button does not turn off during this cycle.

Troubleshooting Steps Taken:

• Tried hard reset and accessing BIOS/UEFI settings.
  
• Unable to boot into Safe Mode or recovery environment.
  

please see here the recorded video demonstrating the boot loop behavior for reference.

Any advice, troubleshooting steps, or insights into what might be causing this problem would be greatly appreciated.

Thank you in advance for your help and suggestions.

 

Boot loop

Hi Terri,

This issue occurs when there are broken components on the boot configuration data of your system. To troubleshoot your boot loop issue, we suggest that you boot in
safe mode through the Windows
Recovery Environment option. To do this, follow these steps:

• Turn on your computer. When the Windows logo appears, unplug and replug the device. Perform these steps three times.
• On the fourth instance, turn on your device without unplugging it. The Windows Recovery Environment window will appear.
  
• On the Choose an option screen, click Troubleshoot.
• Click Advance options.
• Click Startup Settings.
• Click Restart.
• Once your computer restarts, you will see a list of options. Press the F4 key to start your computer in
  safe mode.
  

Once done, we suggest that you perform a system restore after booting in safe mode. System Restore will be able to revert your PC or laptop to their previous state, which can be used to repair and recover system malfunctions or issues. Restoring won’t affect
your personal files, but it will remove apps, drivers, and updates installed after the restore point was made. To do this, follow the steps below:

1. Right-click the Start button, and then select
Control Panel.

2. Search Control Panel for
Recovery.

3. Select Recovery > Open
System Restore > Next.

4. Choose the restore point related to the problematic
app, driver, or update, and then select
Next > Finish.

Feel free to post back if you need further assistance.

 

Windows 10 Repair Boot Loop

Hi Jed,

If your computer is stuck in a boot-loop state of Windows, it could mean that automatic repair isn't able to repair a corrupted or broken system file, but attempts to repair it over and over again. For us to assist you properly in resolving this boot-loop
state, kindly respond to the questions below:

• Did the issue occur even after removing the USB wireless mouse?
• Aside from running DISM, what other troubleshooting steps have you done? This is for us to know and to avoid any duplication of efforts on your end.

We look forward to your response.