Windows 10: Bootloop BSOD Multiple Errors USB Media Creation Tool won't work

So I've been trying to fix this and found someone else had the same issue but never gotten back to the final fix/response.My specs-Intel 14900kf-Nvidia RTX 4070ti-64gb DDR5 RAM-2x 2TB m.2 ssdErrors I've gotten-KMODE EXCEPTION NOT HANDLED-DRIVER IQRL NOT LESS OR EQUAL-CRITICAL PROCESS DIED-SYSTEM THREAD EXCEPTION NOT HANDLED <- This code is the one occurring the most.-SYSTEM SERVICE EXCEPTION What failed: FLTMGR.SYSMore error stop codes may be given as I try to fix while waiting for a response on this threadFixes that I've tried-Use USB boot drive media creation tool-Check/Clean hardware

:)

 

media creation tool error

Hi Tcom-Master

My name is Andre Da Costa; an Independent Consultant, Windows Insider MVP and Windows & Devices for IT MVP. I'm here to help you with your problem.

The error code 0x800424050 x AC01B means that the tool doesn't have permission for it to run. For us to assist you, we suggest that you follow the simple steps listed below:

1.Right-click on the Media Creation Tool.exe.

2.Press Properties.

3.Click on General.

4.At the bottom, click on Unblock.

5.Press Apply, and then OK.

Or

1. Download the Windows 10 Media Creation Tool directly into the USB drive that you want to use as a bootable device (meaning you download the Tool into the same USB you chose to use as an Installation Media). If you already downloaded the tool on your PC's
Desktop, copy it into your USB.

2. Run the Tool directly from your USB, meaning you open File Explorer, locate the MediaCreationTool.exe in your USB and double-click to run it.

The installer should then create an Installation Media/Bootable USB.

Let us know how it goes and if you need further assistance, feel free to post back.

If that does not work, you can also make a bootable copy this way:

Step 1: Go to another working computer with Internet access, download Windows 10 1903 from the following link:

https://tb.rg-adguard.net/index.php?sid=74a7cf5...

Choose the following:

- Windows Final

- Windows 10, version 1903

- Windows 10 Pro + Home

- English

- x64 (64 bit) x32 (32 bit)

Step 2: create a bootable copy

https://answers.microsoft.com/en-us/windows/wik...

 

Window 10 Media Creation Tool errors with 0x80070456 0xA0019

I am trying to use the Windows 10 Media Creation Tool to create a bootable USB flash drive but am getting an error message. It seems download the files successfully but fails part way through transferring the files to the USB drive.

The error message code I get is "Something went wrong ... 0x80070456 - 0xA0019"

The steps I take are

1. Run the program
   
2. Accept the license conditions
   
3. Choose "Create installation media for another PC"
   
4. Language "English (United States)", Edition "Windows 10", Architecture "64-bit (x64)"
   
5. Choose "USB flash drive"
   
6. Choose the USB flash drive from the list
   

I am running Windows 10 Professional. The USB drive is 64Gb.

 

Headache with Windows 10 Media Creation Tool and 0x80042405 - 0xA001A related error.

Greetings,

recently, I have searched about this error regarding the Media Creation Tool and USB pen drive creation but none of the
solutions found were good for me: reformatting USB drive to FAT32, start the media tool from the USB drive itself, disable USB Selective Suspend via Power Options, create am ISO image and use Rufus, and so on. My Microsoft Surface
didn't want to create a bootable USB: I've spend a week and will have tried 20 times at least. To my surprise, my old HP laptop did it at first time instead. Why ????? (At now I don't know).

My first step was to examine the setupact.log file that the Media Creation Tool has created: the error was from the CDIpActionLayoutUsb:repareUsbMedia which by the way did not appear in the other file (???). The
logic told me that the problem was in the pen drive format: partition, disk, volume ? In short, the Format command and the Disk Management tool didn't seem to work and after much test the solution was the DiskPart Windows tool. Here is how to insert it into
the procedure:

• Attach a formatted USB pen to the PC;
• Start the Media Creation Tool, do the all steps until the download of the files starts (You must select first the USB pen disk);
• And now the magic DiskPart tool:
  • start it;
  • By the LIST VOLUME command identifies the volume of the USB pen and remember the attached number;
  • Select it by the SELECT VOLUME <number>
    ;
  • Now use the command CLEAN
  • Enjoy the end;

I don't know why, by this last command permits the Media Creation Tool to complete and create the bootable USB pen correctly. I've tried the procedure 3 times and all works well.

I hope this helps all users that has an headache with the Media Creation Tool.

Simone