Windows 10: Bootup issue. used CHKDSK

Hi,I have a recurring problem where my PC needs to be hard rebooted 1-2 times before it actually turns on.These are what might happen to prompt me to hard reboot- Reached desktop screen but freezes.- PC turn on but black screen.- Reached bootup screen but freezes can tell from the loading circle thing not movingToday it got worse where i cant even reach desktop screen. after afew reboot, i reached the startup repair but it says it cant fix the issue. Restarted and finally got to desktop screen. Ran chkdsk C; /f/r and restarted my pc immediately. I did this cause according to google it might

:)

 

How do I run Chkdsk on bootup on non bootdrives?

How do I run Chkdsk on the system boots up, particularly on drives other than the C drive or non boot drives?

Wrong answers:

fsutil dirty set: I used the command parameter "e: fsutil dirty set" and it simply set the drive as dirty, didn't run chkdsk on bootup.

chkdsk /x /f /r: I used the command parameter on the d drive and it simply ran chkdsk immediatly without even asking if I wanted to run it on restart.

Is it possible to run chkdsk on bootup on drives other than the C drive or non boot drives? It must be because I'm certain I've done this before, I just can't remember how.

Any help would be appreciated, thanks, and if this is in the wrong topic than you have my most sincere and humble apology.

 

Installing an SSD drive on my desktop to use as the C bootup drive

What are you talking about, I have Samsung 830 for 5 years and its still running great there is no issue with NTFS and SSD

To the OP all you have to do is use Macrium Reflect to clone your disk to your SSD you'll have to option to shrink your C partition before you start the actual clone check out this video
it walks you through step by step

 

chkdsk c: /F

It might be an error on the drive. We suggests that you follow the troubleshooting steps below:

• Run Disk Cleanup utility to clear your junk files.
• Open an elevated CMD type sfc /scannow and hit Enter to run the System File Checker.
  
• Once the scan is completed, restart your computer. Remember to exit ChkDsk
  during boot.
• Next, again open CMD as admin type
  Dism /Online /Cleanup-Image /RestoreHealth and hit Enter to repair the Windows image.
• Now see if ChkDsk able to complete the scan.

Note: Before doing the steps, make sure you save a back up of your files.

Let us know how it goes.