Windows 10: Brand New Build PC Having Many Many Issues

Hello,I have just built a brand new PC and installed Windows 11 Home from USB. I have since been experiencing a number of issues as detailed below:- BSOD issue- Applications not behaving as expected, hanging and freezing- Task Manager constantly not responding when attempting to close it- Other system apps such as Direct X Diagnostics freezing upon usageI have included the DMP file below for the BSOD, hopefully this can help start to get to the bottom of this. Upon fresh windows install, I installed the latest drivers using ArmouryCrate and Adrenalin, then did all the available windows updates

:)

 

PC Build Steps

Ok just because I like steps i am going to create some steps. Please give me the stamp of approval/disapproval

• Install system in case
  • Remember to connect SSD and optical to same SATA ports on motherboard
• Turn on PC
• setup HDD
• run blend test in prime95 for 30-60 min
  • run realtemp at the same time

• While in Prime95 test
  • if CPU goes above 70c in RealTemp, I have a leaky CPU
  • if my system locks up or blue screens, there is an instability in the system somewhere
  • if my system does not lock up or blue screen, my CPU is not damaged and I am in the clear!

What do you guys think??

 

New System build Suggestions

just another build suggestion to consider- https://pcpartpicker.com/list/HcvDvV

 

Brand new PC build - Windows 10 will not load - ACPI Bios Error

May I ask why you gave me a bad rating before I had the chance to reply to help you further?

Newer UEFI firmware doesn't have the AHCI setting because it is standard now as the SATA controller default.

If you tried everything in the list including re-enabling UEFI and turning off CSM to use the new features of the UEFI BIOS, what is the exact failure behavior now? Normally when someone does the troubleshooting steps, they report results to give us clues.
Normally when someone says they tried everything, they haven't really even read through the dozen or more steps. I say this as someone who has far more experience on the web troubleshooting install failure than anyone else.

Another step to try on new builds is to remove every component except what's absolutely required to install Windows.

But if you've completed every single step which resolve 90% of failures, then one thing you can try is to move the hard drive into another PC (alone) to install Windows 10 to it, then move it back to the target PC. Windows 10 is remarkably adaptive to new hardware
without needing adaptive restore. If it will start it will swap out all drivers requiring several restarts.

This will also tell us if the problem is with the install or the build. Then if necessary you can tear down the build and try over.