Windows 10: Brand new PC with Win10Pro 22H2 resets itself once a day ???

Dear friends, I have problem with brand new PC I buy them before 7 days and install WInodws 10 Profesional 22H2 with following configurationrocesor: Intel BX8071512400 LGA 1700, Intel Core i5-12400, 18M Cache, 4.40 GHz, UHD Graphics 730Motherboard: Asus PRIME H610M-A D4-CSM LGA1700, Intel H610Graphic Card: Asus DUAL-GTX1630-O4G NVIDIA GeForce Dual GTX 1630 OC Edition 4GB GDDR6, 64-bitSSD drive: Kingston SSD SKC600/512GMemory: 16 GB, 2 x Kingston FURY BEAST RGB KF432C16BBA/8 8GB D

:)

 

Win10Pro transfer to new PC

I bought a PC with Win7Pro already installed (the sticker refers to OEM). This was updated to Win10Pro. The motherboard on this PC has now died and I need to purchase another. Most come with Win10Home and I would wish to transfer the licence from the dead
PC to the new one. Unfortunately, I do not have a Win10Pro licence key to hand (or access to it as the PC is dead). I do have the original disc and the key for the Win7Pro. I cannot find a straightforward answer as to whether I can upgrade a Win10Home installation
to Win10Pro using the Win7Pro key. Please advise.

 

How to factory reset Cisco 1700 Router

Hopefully I can help you here....its a very common thing to happen.


First, I take it you dont know the passwords for console access or telnet/ssh?

I will assume that these devices belong to you.

step 1. Plug a cisco console cable into a serial port on your pc
step 2. Plug other end into Cisco console port
step 3. Using hyperterm or putty or similar connect to the serial port
step 4. boot router, and make sure you clearly can see the output (this confirms you have good serial comms)
step 5. if this fails, adjust the comm port settings (9600, 8,1,n are the default)
step 6. now you have to do the only hard part...send the break command:

Break command list: Break Commands

Go down the list and match your OS and SW and try the sequence suggested.

If this fails several times do what I do: Install putty (free) and then to send a break so you can get into rommom just hit "ctrl-a b".

 

brand new lap top battery

I ran the troubleshoot power option and it said “Display brightness setting is too high”

but it’s a brand new laptop, i should think I could expect the most from it.

I haven’t tried the next steps uou have suggested yet.