Windows 10: Brightness issues

Hello, here's my issue:

only when my laptop is plugged in, every time I enter or exit fullscreen mode (on youtube for instance) the brightness goes down (0%) and up to 100%. This is extremely annoying and it's driving me insane. I already tried to disable adaptative brightness but the setting doesn't appear anywhere in the control panel. Thanks for the help

:)

 

Brightness issues

Hello,

Thank you for visiting Microsoft Community and providing us with the detailed description about the issue.

As per the description, I understand that you are experiencing issue with Brightness settings after upgrading to Windows 10 in the system.

I certainly understand your concern and will try my best to help you.

There is a possibility that this issue might have occurred due to incompatible or corrupt display drivers or the brightness settings are not correct in the system.

I would suggest you to try the following methods and check if it helps.

Method 1:

To check for the brightness settings, please follow the steps given below and check if it helps.

• 
  Press “Windows + C” keys on the keyboard.
  
• 
  In the search box, type
  Power Options.
  
• 
  Click on Power options, and under any plan, click
  Change plan settings.
  
• 
  Click Change advanced power settings.
  
• 
  In the list, expand Display, and then expand
  Enable adaptive brightness.
  
• 
  To turn adaptive brightness on or off when your computer is running on battery power, click
  On battery, and then, in the list, click On or
  Off.
  
• 
  To turn adaptive brightness on or off when your computer is plugged into an outlet, click
  Plugged in, and then, in the list, click On or
  Off.
  
• 
  Click Apply. Click
  OK.
  

If the issue persists, follow method 2

Method 2:

Step 1:
Update the Display driver.

Please follow the steps given below to update the display driver.

• 
  Press Windows key + X when you are at desktop.
  
• 
  Select Device Manager.
  
• 
  Expand Display adapters.
  
• 
  Right-click the display driver and click
  Update Driver Software.
  
• 
  Select Search Automatically for Updated Driver Software.
  

Step 2:

Check if there are any updates for display drivers available in Optional Updates; this might fix the issue. Refer to the following steps.

• 
  At the Start screen, type Windows Update.
  
• 
  Click or tap Settings on the right side of the screen, and then select Install optional updates from the left results.
  
• 
  When the Windows Update control panel opens, click on “Check for Updates” on the top left corner to receive a fresh list of updates.
  

Also see: Download and install drivers

http://windows.microsoft.com/en-ca/windows-8/all-drivers

The above steps holds good for Windows 10 as well.

I hope this information is helpful.

Please do let us know if you need any further assistance, we will be glad to assist you.

Thank you.

 

brightness issue of my windows 10 pro

Hello Adityaattri,

As you are facing issues with changing the brightness on your device after upgrading to Windows 10, do not worry we will help you with this issue.

Do let us know the following to assist you better with this issue:

• What is the make and model of your device?
• Were you able to see any error message/ error code with this issue?
• Have you tried to install all the pending updates for drivers and Windows Updates on your device?

This issue might have happened due to corrupted/ outdated drivers.

I suggest you to refer to the below Microsoft article, try the troubleshooting steps suggested to change the brightness and check if it helps.

Adjust your monitor's brightness and contrast


Hope it helps. Get back to us with an updated status of changing the brightness and required information for further assistance.

Thank you.

 

Brightness Control not working in Windows 10

Hi Ella,

To adjust the brightness, see the steps below:

• Go back to Power Options, and tick on the High performance.
• See if you can adjust the brightness.

If this not work, we highly suggest that you create an Administrator account, and re-do the steps above.

Let us know how it goes.