Windows 10: BSOD after few hours of running

I have completed upgrade of my PC few days ago, ever since there is BSOD popping up after +-3 hours of PC running, in games under heavy load and even while sitting in google docs. I have changed my CPU from i7-8700k to Ryzen 7 platform, and motherboard from Z370 chipset to B650 chipset. RAM also was changed to higher frequency.Im providing minidump files, also i performed RAM test and it passed it. Cheers!

:)

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

BSOD at least twice a month - uncertain cause

I have run driver verifier with the below settings for >48 hours. There have been no BSOD. Please advise on next steps

• I/O verification
• Force pending I/O requests
• IRP logging

 

problem with BSOD

after completed steps suggested, bsod happened few hours later 020522-6187-01.dmp