Windows 10: BSOD After Hide Process

Hello, so i was developing my kernel driver and i have trying features to Hide the specified given process.everything is okay, and the process is hiden.but the problems is it's like will make my pc bsod after ~30 minutes if i using my hiding process features.the hiding method is by unlinking the active process link from EPROCESS structure.i know this may because of Patchguard, but is there a way to do this without any BSOD ?thank you.

:)

 

Boot Process

Hi,

Please suggest me a link that can explain the boot process step by step of ...

• Windows 7,
• Windows 8.1,
• Windows 10,
• Windows Server 2008 R2 and
• Windows Server 2012 R2

With Regards

InTech

 

how to effectively hide or disable the taskbar?

Hi,



Did you try the “Auto-hide the taskbar” option from Taskbar properties?



If you have not tried it, I would suggest you to follow these steps and auto-hide the taskbar:

• Right click on Taskbar.
• Click on Properties
• Check the box Auto-hide the taskbar.
• Click on OK.

Hope this information helps.

 

BSOD Critical Process Died  




This is my config, what should i do?

- - - Updated - - -

I tried also this:
Step 1. From the initial Windows screen, accept the default settings for the language to install, the time and currency format as well as the keyboard or input method. Next, click the Repair your computer link instead of Install now.

choose Repair your computer
Step 2. Select Troubleshoot and then Advanced Options.

Step 3. Select Command Prompt.

Step 4. Type diskpart and press Enter key.

Step 5. Type list disk and press Enter. Now pay attention to the disk number and identify which one is the boot disk. Usually, it is Disk 0; if not, find the disk number in your own case and remember to type the correct one in the following relevant steps.

Step 6. Type select disk 0 and press Enter.

Step 7. Type list volume and press Enter. Now pay attention to the volume number of the EFI partition.

Step 8. Type select volume N and press Enter. Also, type the one in your own case instead of N.

Step 9. Type assign letter=N: and press Enter. N: can be replaced by any drive letter that is not taken by any partition. Remember which drive letter you assign here for it is rather useful in the rest steps.

Step 10. Type exit and press Enter to leave diskpart.

Step 11. Now type N: (the drive lettered you just assigned) and hit Enter.

Step 12. Type format N: /FS:FAT32 and hit Enter.

Step 13. Type bcdboot C:\windows /s N: /f UEFI and hit Enter.

Now repeat the process of running the bootrec /fixboot command, bootrec access is denied Windows 10 should be solved now. But if fixboot access is denied occurs on an MBR disk, continue with Fix #2.

All steps until 13. was executed successfully, but still became on
bcdboot /fixboot
Error: Access is denied. And I have a GPT and no MBR Partition

bootrec /rebuildbcd
was successfully, founded Win installation: 0 (ZERO)
complete

bootrec /scanos found also ZERO installations