Windows 10: BSOD after setup RAID1

Discus and support BSOD after setup RAID1 in Windows 10 Installation and Upgrade to solve the problem; Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1.... Discussion in 'Windows 10 Installation and Upgrade' started by SuperUserOX, May 15, 2024.

  1. SUPERUSEROX
    SuperUserOX Win User

    BSOD after setup RAID1


    Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1. please see my scenario below:Scenario11. Backup OS Windows10 as "Entire System" image.2. Backup OS Windows10 as "Volume Disk0" image.3. Install the second SSD to my device 4. Boot Windows and configure RAID1 via "Intel Optane memory and storage management"5. RAID1 Sync with complete status.6. Reboot device. Result = Blue Screen.Scenario21. Configure RAID 1 via BIOS2. Restore OS to RAID1 disk by using "Entire System" im

    :)
     
    SuperUserOX, May 15, 2024
    #1
  2. SASQUI
    Sasqui Win User

    Building RAID1 config, WITH DATA on disk 1 or 0

    THAT looks like the ticket! It's not clear if AFTER you do that, you end up with a RAID1 setup, or is that just step 1?

    I don't... that's why *Smile BSOD after setup RAID1 :)
     
    Sasqui, May 15, 2024
    #2
  3. JMICKZ13
    Jmickz13 Win User
    Fail to Search RAID1

    WIN 10 won't searchfor files on RAID1 drive
     
    Jmickz13, May 15, 2024
    #3
  4. GENERIDGE
    generidge Win User

    BSOD after setup RAID1

    Win 10, Raid1 + Failed Redundancy + "The Plex Is Missing" ..

    windows 10 with separate Raid1 disk volume for a data disk that is showing dynamic, and missing member.

    Indicates " The Plex is Missing" when i attempt to either

    • reactivate the disk
    • reactivate the volme
    How do i resolve this. Looking at the Device Manager, it indicates both disk drives

    devices are working properly. They are Toshiba DT01ACA100 disks.
     
    generidge, May 15, 2024
    #4
Thema:

BSOD after setup RAID1

Loading...

  1. BSOD after setup RAID1 - Similar Threads - BSOD setup RAID1

  2. RAID1 on WIN 11.

    in Windows 10 Gaming
    RAID1 on WIN 11.: Two identical drives were set up as RAID 1 mirrored. Listed as Intel RAID 1 Volume under Disk Drives in Device Manager.However, the drives was/were not appearing in "This PC", seemingly not having been initialized.Initialization was commenced, but now the option for simple,...

  3. RAID1 on WIN 11.

    in Windows 10 Software and Apps
    RAID1 on WIN 11.: Two identical drives were set up as RAID 1 mirrored. Listed as Intel RAID 1 Volume under Disk Drives in Device Manager.However, the drives was/were not appearing in "This PC", seemingly not having been initialized.Initialization was commenced, but now the option for simple,...

  4. BSOD after new computer setup.

    in Windows 10 Gaming
    BSOD after new computer setup.: I recently built a new computer and am getting a BSOD a few times a day. I am using all new components, except for the hard drive which I ported from my old system. Outside of the BSOD everything seems to be running smoothly, and the system is passing stress tests and...

  5. BSOD after new computer setup.

    in Windows 10 Software and Apps
    BSOD after new computer setup.: I recently built a new computer and am getting a BSOD a few times a day. I am using all new components, except for the hard drive which I ported from my old system. Outside of the BSOD everything seems to be running smoothly, and the system is passing stress tests and...

  6. BSOD after setup RAID1

    in Windows 10 Gaming
    BSOD after setup RAID1: Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1. please see my scenario below:Scenario11. Backup OS Windows10 as "Entire System" image.2. Backup OS Windows10 as "Volume Disk0"...

  7. BSOD after setup RAID1

    in Windows 10 Software and Apps
    BSOD after setup RAID1: Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1. please see my scenario below:Scenario11. Backup OS Windows10 as "Entire System" image.2. Backup OS Windows10 as "Volume Disk0"...

  8. View progress of RAID1 synchronisation

    in Windows 10 Gaming
    View progress of RAID1 synchronisation: HI everone,is there a way to view the progress of a software RAID1 sync on Win10?All I see is this "Synchronisation is repeated" and the taskmanager shows roughly 300mb/s of storage access for the "System"-Process. Syncing the whole HDD should therefore take roughly 15h. But...

  9. View progress of RAID1 synchronisation

    in Windows 10 BSOD Crashes and Debugging
    View progress of RAID1 synchronisation: HI everone,is there a way to view the progress of a software RAID1 sync on Win10?All I see is this "Synchronisation is repeated" and the taskmanager shows roughly 300mb/s of storage access for the "System"-Process. Syncing the whole HDD should therefore take roughly 15h. But...

  10. trying to restore image backup after changing SATA ide to SATA RAID1 setup

    in Windows 10 Installation and Upgrade
    trying to restore image backup after changing SATA ide to SATA RAID1 setup: system is either 1903 or 1909 i honestly didn't look at what update has done since i installed over my Win7Pro... when i run system restore i get the error blah blah blah disk is too small. Replace with a larger disk blah blah blah.... Why exactly am i getting this...