Windows 10: BSOD after setup RAID1

Discus and support BSOD after setup RAID1 in Windows 10 Software and Apps to solve the problem; Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1.... Discussion in 'Windows 10 Software and Apps' started by SuperUserOX, May 15, 2024.

  1. SUPERUSEROX
    SuperUserOX Win User

    BSOD after setup RAID1


    Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1. please see my scenario below:Scenario11. Backup OS Windows10 as "Entire System" image.2. Backup OS Windows10 as "Volume Disk0" image.3. Install the second SSD to my device 4. Boot Windows and configure RAID1 via "Intel Optane memory and storage management"5. RAID1 Sync with complete status.6. Reboot device. Result = Blue Screen.Scenario21. Configure RAID 1 via BIOS2. Restore OS to RAID1 disk by using "Entire System" im

    :)
     
    SuperUserOX, May 15, 2024
    #1
Thema:

BSOD after setup RAID1

Loading...

  1. BSOD after setup RAID1 - Similar Threads - BSOD setup RAID1

  2. RAID1 on WIN 11.

    in Windows 10 Gaming
    RAID1 on WIN 11.: Two identical drives were set up as RAID 1 mirrored. Listed as Intel RAID 1 Volume under Disk Drives in Device Manager.However, the drives was/were not appearing in "This PC", seemingly not having been initialized.Initialization was commenced, but now the option for simple,...

  3. RAID1 on WIN 11.

    in Windows 10 Software and Apps
    RAID1 on WIN 11.: Two identical drives were set up as RAID 1 mirrored. Listed as Intel RAID 1 Volume under Disk Drives in Device Manager.However, the drives was/were not appearing in "This PC", seemingly not having been initialized.Initialization was commenced, but now the option for simple,...

  4. BSOD after new computer setup.

    in Windows 10 Gaming
    BSOD after new computer setup.: I recently built a new computer and am getting a BSOD a few times a day. I am using all new components, except for the hard drive which I ported from my old system. Outside of the BSOD everything seems to be running smoothly, and the system is passing stress tests and...

  5. BSOD after new computer setup.

    in Windows 10 Software and Apps
    BSOD after new computer setup.: I recently built a new computer and am getting a BSOD a few times a day. I am using all new components, except for the hard drive which I ported from my old system. Outside of the BSOD everything seems to be running smoothly, and the system is passing stress tests and...

  6. BSOD after setup RAID1

    in Windows 10 Gaming
    BSOD after setup RAID1: Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1. please see my scenario below:Scenario11. Backup OS Windows10 as "Entire System" image.2. Backup OS Windows10 as "Volume Disk0"...

  7. BSOD after setup RAID1

    in Windows 10 Installation and Upgrade
    BSOD after setup RAID1: Dear SirFor my case, my device is being used for monitoring the machine. It is now running with only one disk. I need to add a second SSD for RAID1. please see my scenario below:Scenario11. Backup OS Windows10 as "Entire System" image.2. Backup OS Windows10 as "Volume Disk0"...

  8. View progress of RAID1 synchronisation

    in Windows 10 Gaming
    View progress of RAID1 synchronisation: HI everone,is there a way to view the progress of a software RAID1 sync on Win10?All I see is this "Synchronisation is repeated" and the taskmanager shows roughly 300mb/s of storage access for the "System"-Process. Syncing the whole HDD should therefore take roughly 15h. But...

  9. View progress of RAID1 synchronisation

    in Windows 10 BSOD Crashes and Debugging
    View progress of RAID1 synchronisation: HI everone,is there a way to view the progress of a software RAID1 sync on Win10?All I see is this "Synchronisation is repeated" and the taskmanager shows roughly 300mb/s of storage access for the "System"-Process. Syncing the whole HDD should therefore take roughly 15h. But...

  10. trying to restore image backup after changing SATA ide to SATA RAID1 setup

    in Windows 10 Installation and Upgrade
    trying to restore image backup after changing SATA ide to SATA RAID1 setup: system is either 1903 or 1909 i honestly didn't look at what update has done since i installed over my Win7Pro... when i run system restore i get the error blah blah blah disk is too small. Replace with a larger disk blah blah blah.... Why exactly am i getting this...