Windows 10: BSOD after Two Months Running Well

Hello,My HP laptop had been BSOD-free for two months. https://answers.microsoft.com/en-us/windows/forum/windows_10-performance/bsod-driververifierdmaviolation-bug-check-code/8e3985d3-9c54-43d7-b9d3-587d34b4954d?messageId=b58c21d4-a5bd-4184-8ab6-2717f848eeb1Today BSOD happened shortly after Office update. Minidump:https://www.dropbox.com/s/lh36ib5u6m3gmui/122321-37500-01.dmp?dl=0System info: Host Name: DESKTOP-B2UFAJC OS Name: Microsoft Windows 10 Enterprise OS Version: 10.0.19044 N/A Build 19044 OS Manufacturer: Microsoft Corporation O

:)

 

BSOD at least twice a month - uncertain cause

I have run driver verifier with the below settings for >48 hours. There have been no BSOD. Please advise on next steps

• I/O verification
• Force pending I/O requests
• IRP logging

 

Getting BSOD 0x124 error

Ignore what everone said here.

0x124 BSOD is usually related to VCCIO (VTT), run Prime95 version 26.6 with custom sizes of 512K to 640K with 50% of your memory for at least 8 hours.

If you get a 0x124 BSOD, increase VCCIO voltage by small steps, run Prime95 again until your stable.

If you pass Prime95 512K to 640K without a BSOD, then its Vcore too low. I'd suggest running IntelBurnTest with 80% of your memory to verify stability (8 to 12 hours).

Oh, and yeah, if this problem appeared all of the sudden, the reason is CPU degradation, you can prevent it by enabling C-States or adjust your overclock to use lower voltages.

 

7 different BSoD

Hey guys,

I have a serious problem. I make it as short as possible:

• system runs 100 % fine with the 10.12
• updatet to Catalyst 11.1 -> BSoD
• updatet to 11.1 Hotfix -> BSoD
• rollback to 10.12 -> BSoD
• removed ALL AMD files manually, installed 10.12 -> BSoD

• Temps are fine
• no sfc /scannow errors
• no chkdsk errors
• Prime, Furmark all fine
• regardless what driver I install -> BSoD
• I did no hw changes, no OC

Here are my BSoDs I receive:

• 0x0000010e
• 0x1000007e
• 0x0000007e
• 0x0000004e
• 0x0000003b
• dxgmms1.sys
• PFN_LIST_CORRUPT

They all refer to the GPU of course ...

From now on I receive a BSoD every time I try to play a game (especially BC2 and SC II) even if I completely remove the old driver and make a clean install.
Apparently the 11.1 damaged my system irreparable.

Any advice or info would be very much appreciated *Smile