Windows 10: BSOD AGAIN Reliability report says hardware issue but I cant read the minidump.

If you go back and see my post history you will see Ive been fighting this since February. About a month ago I finally just bought new ram and that fixed the issue for about 2 weeks but now its back. Same problem different ram and now I don't know what to check. I've already run filescan, checked for updates, drivers, Motherboard is all factory settings. Hardware:Specs: Ryzen 5900x ROG 8 Dark Hero 3080 RTX ti 64GB ram Win11Reliability report from last nights BSOD. Source Windows Summary Hardware error Date ‎10/‎20/‎2024 3:11 PM Status Report sent Description A problem with your hardware ca

:)

 

ONGOING BSOD ISSUES

Hi BSODARGH,

Thanks for sharing the minidump files.

I am afraid that the minidump files indicated the same file as a cause of the BSOD.

If you have tried all suggested steps above, I would suggest returning the computer to the store if its warranty still applicable. If not, take it to a reliable maintenance shop to take a look at it.

Please do not hesitate to ask if you need further assistance.

Stay safe

 

Minidumps not generated after a bluescreen in Win8.1

Lenovo Flex 2-14, windows 8.1 64bit, 4GB RAM, 8SSD-500HDD. All software setup from factory.

The laptop freezes randomly without any pattern and BSOD.

The bluescreen says kernel_data_inpage_error and collecting more info is stuck at 0%. It never progresses and I have to hard power down the laptop. After reboot, there are no minidumps generated(minidump is enabled in adv. settings). Sometime the BSOD also gives another additional info in braces (ntoskernal.sys, volmgr.sys, and few other). occurs at least once every one/two day. Any reason why Minidump is not generated?

Sometimes the laptop also restarts for no reason and shows up the windows boot manager which does not lists the HDD. Is it that HDD is not detected and is it related to the above problem?

The HDD is GPT partioned with UEFI boot enabled. After a lot of factory resets, and even after upgrading to win10, had the BSOD issues.

Someone suggested to change the boot option to legacy. Now I have factory image restored (win8.1) in GPT HDD with leagcy first boot option. I have used the the laptop for a couple of days and the BSOD did not occur till now. Is this a right solution?

Is this a hardware problem because This BSOD occurred in the middle of HDD partitioning after rebooting in AOEMI partition assistant and once while upgrading to win10.(loose cable maybe, but its a brand new laptop and the issue occurred even before putting on any new software) or caused by the boot options?

 

BSODs, even after fresh windows install

I will try the solutions you suggested, however when you say "log files" are you referring to the minidumps or the list of issues and BSODs I wrote? If its the list I wrote then all of those issues also occur without compiling/using rust, it is simply a way I've found to reliably check if I have solved the issues since so far I have had 100% consistency with being unable to compile. Otherwise after each step I would have to wait a few minutes to a few hours for a random BSOD or other issue to occur.

I also have another suspicion that the issue lies with one or more individual CPU cores, I will be running memtest86 on each core individually to see if there is a observed difference.

Any and all troubleshooting tips are highly appreciated.