Windows 10: BSOD and crashes after SSD swapping

OS: Windows 10About half a year ago I replaced the SSD of my Medion Erazer x67065 desktop 256GB PCIe, Phison PS5012-E12 because it could no longer be detected by the system. My PC crashed, OS was on the SSD. I ran an OS on an USB stick to recover my data, and the SSD no longer showed up. I later tried to read the SSD with an external reader, but no luck there either.I bought a new SSD Kingston NV2 PCIe 4.0 NVMe M.2 and installed it. At first things seemed to work normally. However, whilst downloading larger games I noticed my PC becoming quite laggy, and the download stopped at times. Ch

:)

 

Cloning to SSD then swapping drive letters


@SamHobbs
What you want done is very simple and can be done in short period of time. Here's my suggestion:
There's 2 modes that Windows can be installed: UEFI and the old legacy MBR. Open Disk Management, look at the disk where your C drive is, if there's a

1. EFI System Partition, your Windows was installed using UEFI.
2. System Reserved partition, your Windows was installed using MBR

Next, Connect your SSD to an available Sata port (no need to format or do anything). Download: Macrium Reflect Free . Install and run. Follow the steps below:

1. From Macrium, click on image this disk under your C drive and save it to either an Internal or External Drive. This will create a single backup image of the whole disk containing your C drive.
2. Again, from Macrium, click on Restore tab and select the image created from step 1, Select your SSD as the destination drive, click Next->Finish
3. Exit Macrium. If your Windows was installed using MBR, Open disk management and make sure the SSD is marked "Active" else go to next step.
4. Shutdown your PC. Disconnect the HD containing Windows C drive then connect your SSD to it.
5. Reboot. Your PC should boot and the Windows should have C as the drive letter.

NOTE: The procedure above is to backup your Windows to an image file then copy it back to the SSD. This ensures proper cluster size aligment for the SSD. In addition, Macrium also perform Trimming for the SSD. This is more preferable than cloning.

 

all games crash!

I suggest you run rthdribl > http://www.daionet.gr.jp/~masa/archives/rthdribl_1_2.zip
Increase the window size step by step and watch your vga temps permanently.
What happens?
If it crashes, run at stock speeds as suggested before and retry.

P.S.: When your system locks, does the display signal turn off after a time?
Stuttering sound or no sound at all when freezing?
What X1800XT model do you own exactly?

 

Swap C & D Drive back to SSD & HHD

I had some issues with updating Windows: Redirecting

I followed the steps but I noticed that Windows 11 was working really slowly. I looked on Task Manger and it looks like my drives have swapped? Originally my C drive was the SSD and D drive was HDD but now they have swapped so C Drive is HDD and D is SSD.

How can you swap your drives?