Windows 10: BSOD and USB device issues

Hi, I've been having BSOD on multiple occassions with the same error message "DRIVER_VERIFIER_DMA_VIOLATION". I have also been having issues with my USB devices mouse, keyboard, headset and controller where my usb devices will stop responding and when trying a different port windows gives a notification saying "the usb device has malfunctioned".System specs :Mouse: Razer Deathadder v2Keyboard RITEK 202OS Windows 10 Home 64-Bit 10.0, Build 19045Motherboard ASUS Prime B660-PLUS D4 LGA 1700Intel 12th Gen ATX MotherboardGPU: AMD Radeon RX 6650 XTCPU 12th Gen IntelR CoreTM i5-12400F 12

:)

 

IRQ memory BSODS, device manager, memory range?

The only time I've seen that type of BSOD for myself is when I fried the PCI-e slots on my Striker 2 board... There wasn't anything that I could do, try and rma and go on.. I would suggest the steps that MilkyWay has said.. But, if you really don't know much about Bios's... I wouldn't play with Irq's... That can mess up everything on your board. USB, ethernet, ram, chip... But, that's just me on playing with irq's... To much of a hassle IMHO..

 

BSOD driver_corrupted_expool plugging in USB device


Hi Wendelly,

As you say it is from your USB ports, but I have 2 questions regarding this.

1. Does a BSOD occur with every (should working) device you're trying to connect via USB?
2. Does a BSOD occur when a device is connected on different USB ports?

 

USB Devices Don't Work Properly After Restart

Hi,



I understand your concern and will assist you to resolve the issue.



I suggest you to follow the methods below and check if it helps.

Method 1: Windows has a built-in troubleshooter to check and fix issues with Hardware and Devices. I would suggest you to run this troubleshooter to check if the issue
is with your Devices.

Refer these steps:

• 
  Press Windows key +X, select Control panel.
  
• 
  Change the view by option on the top right to Large icons.
  
• 
  Click on troubleshooting and click on the view all option on the left panel.
  
• 
  Run the Hardware and Devices.
  

If the issue persist I suggest you to follow method 2.

Method 2: I suggest you to updating the latest USB devices from the manufacturer's website and check if the issue persists.

Follow the steps to update the USB drivers:

a. Press Windows key + X key and click Device Manager.

b. Expand the USB driver.

c. Right-click on the USB and click on Update driver software.

d. Restart the computer and check.



Keep us posted on this issue so that we can assist you better.