Windows 10: BSOD - Automate how to show cause and resolution

I am working with Riverbed and we have software that capture Windows Event logs summary. I would like to automate the way how we can show the cause of BSOD and provide suggestion on how to resolve it from Enterprise wide view.from our solutiion called, aternity, I can see how many users are impacted with same issue of BSOD, and identify how frequent it happened.Here is some screenshots from our solution:https://view-su2.highspot.com/viewer/65cdb40002b8272c1c29437ePlease help me to decode the hex value in module info for Device Power State Failure, to know if the cause is chipset/motherboard, o

:)

 

causes for bsod

a friend of mine is getting bsod's everytime she uses her computer. it is usually at boot, but sometimes at the desktop, but the computer shows the bsod then goes back to normal and runs fine. I was wondering what exactly would cause a blue screen that would not crash the computer.

 

Resolution?

Hi Ryan,

Welcome to Microsoft Community.

I understand that you want to change the screen resolution in Windows 10. We will assist you to resolve this issue.

Before we proceed, we require more information to assist you better.

• What are the options you are getting?
• How exactly are you trying to change the screen resolution?

I suggest you to follow the steps provided below to change the screen resolution.

• Right click on desktop.
• Select Display settings.
• Click on Advance display settings.
• Under resolution drop down, you can select the option 1600x900.

Hope this information is helpful. For any further assistance on Windows, feel free to post your query on Microsoft Community Forum.

Thank you.

 

BSOD Hardware Caused???

they do weird things like that, which all seem like something else is failing.
One of the worst things to diagnose, they seem to only quit when they want to.

Memtest is a good next step, if you rule out RAM and Power Supply make sure you disconnect all unnecessary peripherals and try to start the system with as little hardware as possible, if it works then, you can narrow down the culprit by trial and error.

the follow was taken from some website:

It's very difficult to determine if a failure is caused by the CPU because many other components can cause the same symptom when they fail.

1. System fails to boot
2. System re-boots intermittently
3. General Protection Fault
4. Illegal Operation
5. Stop Error, or BSoD (Blue Screen OfDeath)

Actually, CPUs rarely fail, and about the only way to determine if the CPU is causing the failure is to swap it out with a known working CPU of the same type and speed. Since this is difficult, the best bet is to first rule out every other possibility.

Before suspecting the CPU, rule out all the possibilities listed below.

1. The Operating System
2. A peripheral port device
3. A bad memory module
4. The hard disk drive
5. The power supply
6. The motherboard

If you have ruled out out all the other possibilities, investigate the items listed below.

1. Overheating
2. A short circuit
3. ESD