Windows 10: Bsod bad_pool_header

My computer bsod randomly when i'm browsing the internet (once every 6 days or so). I'm thinking it's a driver issue but am unsure which drivers to reinstall. This computer is around 3 months old which i built.

:)

 

Bad_Pool_Header started after a Windows 10 upgrade

How have you determined that the computer is no longer infected?

Are you still getting the Bad_Pool_Header BSODs or...?

 

Windows 10 = Bad_Pool_Header Blue Screen

I too have experienced the BSOD with a Bad Pool Header error. I reinstalled and was fine for about a week and now it's doing it again! :-(

What are the most likely culprits? There is no alpha-numeric code associated with the "Bad_Pool_Header" BSOD.

 

Hi,

So i'm gonna ask some of the other techs here to do a second opinion on this.
Cause the info i found about your mobo is inconclusive.
In the files, i found that your Motherboard is : H110M-H-CF by Gygabite.
But if you google that, you will end up with GIGABYTE - Motherboard - Socket 1151 - GA-H110M-H DDR3 (rev. 1.0)
Over there is specifies :

• Support for DDR3/DDR3L 1600/1333 MHz memory modules

Now according to your dump-files, you are running the following modules:
Vengeance® LPX 8GB (2x4GB) DDR4 DRAM 2133MHz C13 Memory Kit - Black (CMK8GX4M2A2133C13)
HTML Code: [Memory Device (Type 17) - Length 40 - Handle 0043h] Physical Memory Array Handle 0042h Memory Error Info Handle [Not Provided] Total Width 64 bits Data Width 64 bits Size 4096MB Form Factor 09h - DIMM Device Set [None] Device Locator ChannelA-DIMM0 Bank Locator BANK 0 Memory Type 1ah - Specification Reserved Type Detail 0080h - Synchronous Speed 2133MHz Part Number CMK8GX4M2A2133C13[/quote] So it seems that you are running memory faster than your mobo can handle (2133mhz vs 1600/1333 mhz) AND its DDR3 vs DDR4.
But as i started out, i want a second opinion on this diagnotic.
Or can you confirm the Mobo i linked above is indeed your MOBO ?

 

This one is my motherboard GIGABYTE - Motherboard - Socket 1151 - GA-H110M-H (rev. 1.0)

It supports DDR4.

 

Wauw, that's not at all confusing :/
Even now i had to look twice to notice the difference.
Who does that, the productpages are almost identical :/

Anyway sorry for my little rant.

So we can scratch theorie above then.

I still think we do need to look at the RAM module, since its being mentioned a lot.

Code: Probably caused by : memory_corruption[/quote] Try to run the following memory tests, see what happens:

MemTest86+ - Test RAM - Windows 10 Forums

 

I ran memtest and it came up with some errors
Attachment 111923
Do i have to replace my ram?

 

This certainly means there are problems with your memory, but now you have to test if it is your Module(s) or Slot(s) of your Mobo.
How to do this extended testing, see the endpart of this tutorial MemTest86+ - Test RAM - Windows 10 Forums .