Windows 10: BSOD Bugcheck code: 0xE6 (0x26, 0xFFFFDE0A1209C570, 0x24, 0x6 Error:...

Hi,


Intermittent BSOD failures


On Mon 18/02/2019 15:35:53 your computer crashed or a problem was reported
crash dump file: C:\WINDOWS\Minidump\021819-17312-01.dmp
This was probably caused by the following module: hal.dll (hal+0x3C6F7)
Bugcheck code: 0xE6 (0x26, 0xFFFFDE0A1209C570, 0x24, 0x6)
Error: DRIVER_VERIFIER_DMA_VIOLATION
file path: C:\WINDOWS\system32\hal.dll
product: Microsoft® Windows® Operating System
company: Microsoft Corporation
description: Hardware Abstraction Layer DLL
Bug check description: This is the bug check code for all Driver Verifier
This appears to be a typical software driver bug and is not likely to be caused by a hardware problem.
The crash took place in the Windows kernel. Possibly this problem is caused by another driver that cannot be identified at this time.



I get these intermittently, but cannot pin down the root cause, or the driver that might be causing the problem.


Already tried 'sfc scannow' and 'dism' repairs, which improved things for a short time but these failures are back now.


I've grabbed the minidump and the info, and posted them in this folder: https://1drv.ms/f/s!AlEPpRIPB3SPhsh5yrjLIoj3Iil0Aw



Any assistance would be appreciated!

:)

 

(BSOD) bugcheck was: 0x000000a0 INTERNAL_POWER_ERROR

Has any one got this BSOD when stress testing a overclock before? i can get the minidump if some one can read it for me i was trying for 4.5Ghz @ 1.31v and after around 20min of stressing i would get this BSOD and it would shut my system down not even sure i saw a BSOD just a shutdown?

 

BSOD - Registry Error

Your BSOD code is 0X000000051

Here's the Google search I did for it: https://www.google.com/search?q=0x0...j5.399j0j7&sourceid=chrome&es_sm=122&ie=UTF-8

There is a hotfix available that might help, https://support.microsoft.com/en-us/kb/810558

This thread makes a few good suggestions too: http://www.sevenforums.com/bsod-hel...dows-7-pro-sp1-registry-error-0x00000051.html

+1 to listing your full system specs, OS version, etc. I did only look at your BSOD log file.

Run a Diskchk /R (I know you already ran one, so you can skip this)

Run SFC /SCANNOW

Report back.

 

"The computer has rebooted from a bugcheck. The bugcheck was: 0x00000124 " BSOD on Windows 10.

Hi Jayan,



Please reply to a few questions asked below:

• Since when are you facing the above issue? Did you make any recent changes to the computer?
• Did you try booting the computer in Safe mode and check if the issue persists?

We are not able to access the link shared in the above post. If haven’t tried, please follow the steps suggested above and check if similar issue occurs on the computer.



Write to us with the answers to the above questions and the status of bugcheck error code received on the computer for further assistance.
Your reply is most important for us to ensure we assist you accordingly.



Thank you.